| Details |
|---|
|
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts are not supplied with the sleeve and must be ordered separately. They facilitate easy mounting, securing and dismounting,
|
| Product properties | |
|---|---|
| Brand | BTC |
| Category | Online Specials |
| Length (mm) | 135.0 |
| Shaft Diameter (mm) | 150.0 |
| Thread Size | M165 X 3.0 |
| Series | Metric |
| Appropriate LockNut | KM 33 |
