Bearing Man Group is arguably the largest Loctite Threadlocker Distributor in South Africa. Working closely with Henkel South Africa and taking part in the LSX training program, and we offer expert opinions and advise. We keep large amounts of stock throughout our branch network. Apart from being a Loctite threadlocker distributor, we also stock the cleaning, retaining, gasketing, bonding and polymer composite range from Loctite. Five reasons why Loctite thread locker needs to be in your toolbox: 1. Loctite threadlocker offers a low, medium, and high strength threadlocker that secures all types of threaded fasteners like bolts, nuts, and studs, as well as sealing them against corrosion. These threadlocker options will be suitable for most of the standard thread locking applications. 2. One bottle of Loctite threadlocker can reduce your inventory on different sizes of mechanical fasteners. 3. When using the right grade of Loctite threadlocker, you will not need surface preparation on active and reactive metals. 4. Loctite threadlocker offers a grade of thread locker that is tolerant to minor oil contamination, reducing cost of cleaners and preparation time. 5. Choosing the right grade of Loctite threadlocker you can easily disassemble with normal hand tools when needed. Loctite threadlockers work on anaerobic technology that hardens in the absence of air and presence of metal ions. When Loctite threadlockers are used on bolt and the nut is tightened, the liquid spread covering all the gap between the nut and bolt and prevents loosening. A typical nut & bolt has as little as 15% metal to metal contact leaving enough space for the Loctite threadlocker to spread and cure. In most cases the Loctite threadlocker is applied to the male threads on the bolt, but in blind hole applications, the Loctite threadlocker is applied into the female threads, and then then pushes it way up the threads as the bolts are inserted. When you need a quick cure on your Loctite threadlocker, you can use an anaerobic primer or activator.