- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Categories
M16X65MSCSBN
CUP SQUARE/NUT PLAIN GR4.8 STD 16X2X65mm 138/BAG DIN603
Fastbolt
R123,48
Per Kg
Excl. VAT
M16X65MSPBNZP
PLOUGH BOLT/NUT ZINC PLATED GR4 STD 16X2X65mm 180/BAG DIN605
Fastbolt
R41,31
Per Kg
Excl. VAT
M16X65HTS10.9OD
SET SCREW HEX OLIVE DIPPED GR10.9 STD 16X2X65mm DIN933
Fastbolt
R12,61
Excl. VAT
Each
M16X65HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 STD 16X2X65mm DIN931
Fastbolt
R13,70
Excl. VAT
Each
M16X65MSUBNWZP
U-BOLT M16X2.0X65 IH115mm CC94mm TH50mm NUTS-WASHERS ZP
Fastbolt
R54,57
Excl. VAT
Each
M16X65MSUBNWHDG
U-BOLT M16X2.0X65 IH115mm CC94mm TH50mm NUTS-WASHERS HDG
Fastbolt
R84,16
Excl. VAT
Each
M16X65MSSN
SET SCREW/N HEX PLAIN GR4.8 STD 16X2X65mm 157/BAG DIN558 934
Fastbolt
R63,25
Per Kg
Excl. VAT
M16X65MSSNZP
SET SCREW/N HEX ZINC PLATED GR4.8 STD 16X2X65mm 157/BAG DIN558 934
Fastbolt
R77,03
Per Kg
Excl. VAT
M16X65MSCSBNZP
CUP SQUARE NUT ZINC GR4 STD 16X2X65mm 138/BAG DIN603
Fastbolt
R134,89
Per Kg
Excl. VAT
R123,48
Per Kg
Excl. VAT
R34,66
Excl. VAT
Each
R41,31
Per Kg
Excl. VAT
TBQ
R12,61
Excl. VAT
Each
R6,87
Excl. VAT
Each
R27,39
Excl. VAT
Each
R41,06
Excl. VAT
Each
TBQ
R13,70
Excl. VAT
Each
R20,33
Excl. VAT
Each
R6,78
Excl. VAT
Each
R8,20
Excl. VAT
Each
R9,84
Excl. VAT
Each
R54,57
Excl. VAT
Each
R84,16
Excl. VAT
Each
R79,33
Per Kg
Excl. VAT
R63,25
Per Kg
Excl. VAT
R77,03
Per Kg
Excl. VAT
R134,89
Per Kg
Excl. VAT
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location