- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
Bore Type
23120 EJW33C4 TIM
SPHERICAL ROLLER BEARING PARALLEL C4 CLEARANCE 100X165X52MM TIMKEN
Timken
R4 017,50
Excl. VAT
Each
24024 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 120 x 180 x 60 mm, NTN.
NTN
R5 676,06
Excl. VAT
Each
24026 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 130 x 200 x 69 mm, NTN.
NTN
R6 778,51
Excl. VAT
Each
24040 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 200 x 310 x 109 mm, NTN.
NTN
R15 932,86
Excl. VAT
Each
24132 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 160X270X109MM
NSK
R5 206,70
Excl. VAT
Each
22318 MC4F80 ROL
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 90X190X64MM ROLLWAY
Rollway
R4 538,96
Excl. VAT
Each
22322 MC4 SLIP
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 110X240X80MM
NSK
R9 442,22
Excl. VAT
Each
22336 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 180X380X126MM
NSK
R32 062,05
Excl. VAT
Each
238-1180 KEMBW20W904C4 T
SPHERICAL ROLLER BRG TAPERED BRASS C4 CLEARANCE 1180X1420X180MM TIMKEN
Timken
R1 841 647,23
Excl. VAT
Each
22216 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 80 x 140 x 33 mm, NTN.
NTN
R1 310,19
Excl. VAT
Each
22218 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 90 x 160 x 40 mm, NTN.
NTN
R2 119,23
Excl. VAT
Each
22222 EJW33C4 TIM
SPHERICAL ROLLER BRG PARALLEL STEEL C4 CLEARANCE 110X200X53MM TIMKEN
Timken
R4 271,28
Excl. VAT
Each
22314 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 70 x 150 x 51 mm, NTN.
NTN
R2 985,16
Excl. VAT
Each
22211 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 55 x 100 x 25 mm, NTN.
NTN
R995,19
Excl. VAT
Each
22314 CDE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 70X150X51MM
NSK
R2 559,62
Excl. VAT
Each
24028 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 140X210X69MM
NSK
R5 081,92
Excl. VAT
Each
24034 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X260X90MM
NSK
R7 954,10
Excl. VAT
Each
24044 BC4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 220 x 340 x 118 mm, NTN.
NTN
R15 714,64
Excl. VAT
Each
24132 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 160 x 270 x 109 mm, NTN.
NTN
R7 045,00
Excl. VAT
Each
22314 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 70X150X51MM TIMKEN
Timken
R3 441,26
Excl. VAT
Each
R4 017,50
Excl. VAT
Each
R5 676,06
Excl. VAT
Each
R6 778,51
Excl. VAT
Each
R15 932,86
Excl. VAT
Each
R5 206,70
Excl. VAT
Each
R4 538,96
Excl. VAT
Each
R9 442,22
Excl. VAT
Each
R32 062,05
Excl. VAT
Each
238-1180 KEMBW20W904C4 T
SPHERICAL ROLLER BRG TAPERED BRASS C4 CLEARANCE 1180X1420X180MM TIMKEN
Timken
R1 841 647,23
Excl. VAT
Each
R1 310,19
Excl. VAT
Each
R2 119,23
Excl. VAT
Each
R4 271,28
Excl. VAT
Each
R2 985,16
Excl. VAT
Each
R995,19
Excl. VAT
Each
R2 559,62
Excl. VAT
Each
R5 081,92
Excl. VAT
Each
R7 954,10
Excl. VAT
Each
R15 714,64
Excl. VAT
Each
R7 045,00
Excl. VAT
Each
R3 441,26
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location