| Details |
|---|
|
Inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heattreated and finished by grinding, and used as the raceway surfaces. However, when it is impossible to make shaft surfaces according to the specified surface hardness or surface roughness, inner rings are used. When shafts move axially or seals are used adjacent to bearings, wide inner rings can be selected. Inner rings can also be used economically as bushings without requiring any additional machining.
|
| Product properties | |
|---|---|
| Brand | IKO |
| Category | Inner Rings |
| Inside Diameter (mm) | 50.0 |
| Outside Diameter (mm) | 60.0 |
| Width (mm) | 40.0 |
| Appropriate Bearing | RNAFW 607840 - NAX 60 |
| Series | Metric |
| Design Type(s) | For General Use |
| Bearing Type | Inner Ring |
| Download |
|---|