Skip to content Skip to navigation menu
ArticleLRT 222830

INNER RING GEN USAGE 22X28X30MM BRG RNA 69/22 IKO

Brand: IKO
Your order will be fulfilled from your branch. For surplus stock from Central Distribution, please allow 3 - 5 working days from delivery.

Stock Status : Sold Out



R120,10

Each
Excl. VAT
Details

Inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heattreated and finished by grinding, and used as the raceway surfaces. However, when it is impossible to make shaft surfaces according to the specified surface hardness or surface roughness, inner rings are used. When shafts move axially or seals are used adjacent to bearings, wide inner rings can be selected. Inner rings can also be used economically as bushings without requiring any additional machining.

Product properties
Brand IKO
Category Inner Rings
Inside Diameter (mm) 22.0
Outside Diameter (mm) 28.0
Width (mm) 30.0
Appropriate Bearing RNA 69/22
Series Metric
Design Type(s) For General Use
Bearing Type Inner Ring