Bearings - Plain - Rod Ends

ROD ENDS

ROD ENDS are compact self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time. ROD ENDS consist of an eye shaped head and are available with left- or right-handed threads. ROD ENDS are classified by sliding surface types, namely, insert type, die-cast type, and maintenance-free type. The Rod End insert features, a spherical inner ring contacts the special copper alloy bushing with superior run-in properties. The Rod end Die-cast, features a spherical inner ring that makes direct contact with the bore surface of the body of special zinc die-cast alloy. There is also maintenance-free Rod End bearing which has a spherical inner ring contacts the special PTFE liner, thus a smooth rotational and oscillatory motion can be achieved with superior anti-wear and loading properties in each type. PILLOBALL ROD ENDS have either a female thread in the body or a male thread on the body, and they can be easily assembled onto machines. PILLOBALL ROD ENDS are used in control and link mechanisms in machine tools, textile machines, packaging machines, etc. The maintenance-free type Rod End bearing is especially suitable for loading in one direction and is the best choice for machines in which oil must be avoided such as food processing machines, or machines which cannot be re-lubricated.

ROD ENDS

ROD ENDS are compact self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time. ROD ENDS consist of an eye shaped head and are available with left- or right-handed threads. ROD ENDS are classified by