| Details |
|---|
|
Pillow block housings are the most popular housing design for mounted bearings. Featuring a one-piece cast iron housing they are designed to support loads primarily directed through the base. The two bolt holes are slotted for adjustment during mounting. The pillow block is supplied with a grease fitting for relubrication. Available from BMG in a range of different sizes.
|
| Product properties | |
|---|---|
| Brand | RHP |
| Category | Pillow Block |
| Inside Diameter (mm) | 35.0 |
| Overall Length (mm) | 108.0 |
| Overall Width (mm) | 47.6 |
| Weight (kg) | 1.64 |
| Shaft Center Height (mm) | 47.76 |
| Mount Hole Center To Center (mm) | 82.5 |
| Bore Type | Parallel |
| Duty | Light |
| Mount Hole Size | 10 |
| Bolt Size | M10 |
| Number Of Mount Holes | 2 |
| Design | Tapped Base Pillow block |
| Download |
|---|