10 Products found
VB17X1670 F CE
FRICTION BELT V COGGED BX SECTION BX64 17 X 11 X 1670MM FENNER
Fenner
R230,40
Excl. VAT
Each
VB17X2350 F CE
FRICTION BELT V COGGED BX SECTION BX91 17 X 11 X 2350MM FENNER
Fenner
R478,58
Excl. VAT
Each
VB17X1030 F CE
FRICTION BELT V COGGED BX SECTION BX39 17 X 11 X 1030MM FENNER
Fenner
R130,20
Excl. VAT
Each
VB17X1010 F CE
FRICTION BELT V COGGED BX SECTION BX38 17 X 11 X 1010MM FENNER
Fenner
R158,37
Excl. VAT
Each
VB17X1310 F CE
FRICTION BELT V COGGED BX SECTION BX50 17 X 11 X 1310MM FENNER
Fenner
R726,28
Excl. VAT
Each
VB17X1390 F CE
FRICTION BELT V COGGED BX SECTION BX53 17 X 11 X 1390MM FENNER
Fenner
R282,99
Excl. VAT
Each
VB17X1690 F CE
FRICTION BELT V COGGED BX SECTION BX65 17 X 11 X 1690MM FENNER
Fenner
R265,68
Excl. VAT
Each
VB17X1950 F CE
FRICTION BELT V COGGED BX SECTION BX75 17 X 11 X 1950MM FENNER
Fenner
R306,36
Excl. VAT
Each
VB17X2460 F CE
FRICTION BELT V COGGED BX SECTION BX95 17 X 11 X 2460MM FENNER
Fenner
R385,98
Excl. VAT
Each
VB17X2250 F CE
FRICTION BELT V COGGED BX SECTION BX87 17 X 11 X 2250MM FENNER
Fenner
R353,10
Excl. VAT
Each
R230,40
Excl. VAT
Each
R478,58
Excl. VAT
Each
R130,20
Excl. VAT
Each
R158,37
Excl. VAT
Each
R726,28
Excl. VAT
Each
R282,99
Excl. VAT
Each
R265,68
Excl. VAT
Each
R306,36
Excl. VAT
Each
R385,98
Excl. VAT
Each
R353,10
Excl. VAT
Each
Added to Your Shopping Cart
V Belt Drive
A typical V belt drive system will consist of a drive pulley, a driven pulley, and a belt. Some V belt drive systems also incorporate a tension system to facilitate in the correct tensioning of the belt. The belt could be a V belt, wedge belt, flat belt or multi-groove belt. The V belt drive system can consist of 1 or more belts. The most critical part of a V belt drive is the drive belt. Installation plays a major role in the lifetime and efficiency of the belt. Having a belt that is correctly tensioned will optimize the transmission of power and the efficiency of the V belt drive. If the belt is over tensioned, loss of the belts or reduction in efficiency will result. On the other hand, if the belt is under tensioned, the belt will slip resulting in power transmission and efficiency loss, wear on the pulleys and damage to the belt. Under tensioned belts also create more vibration in the V belt drive system which can have an adverse effect on bearings in the drive and driven machine. When installing belts onto a v belt drive system the belts should never be rolled onto the pulleys as this will damage the belt cords and reduce the amount of power that the belt can transmit. Allowance for belt installation should always be factored into the design of the v belt drive system.
Product Availability by Store Location