Skip to content Skip to navigation menu
Article1025G20 FALK GEAR

COUPLING COMPLETE GEAR G20 TYPE 1025G 7474NM 5000 RPM FALK

Brand: Falk
Your order will be fulfilled from your branch. For surplus stock from Central Distribution, please allow 3 - 5 working days from delivery.

Stock Status : Sold Out



R11 131,91

Each
Excl. VAT
Details

The G20 gear coupling is a double engagement, close coupled solution with two flex halves to accommodate both offset and/or angular misalignment as well as end float. Engineered for all horizontal, close coupled applications including fans, overhead cranes, conveyors, steel and paper mill equipment, it is adaptable with limited end float for use on electric motors, generators and other machinery fitted with sleeve or straight roller bearings. The couplings are engineered to accommodate torque loads up to 1,197,000 (lb-in) and shaft diameters up to 56.50 inches.

Product properties
Brand Falk
Category Gear
Outside Diameter (mm) 212.852
Bore Type Pilot Bore
Material Steel
Series G20
Max Speed RPM 5000.0
Max Bore (mm) 92.075
Hub Diameter (mm) 130.556
Component Coupling
Coupling Type Non-elastic
Min Bore (mm) 31.75
Length Through Bore (mm) 77.0
Hub Length (mm) 76.962
Nominal Torque Rating (Nm) 7474
Size 1025
Download