- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Categories
Surface Finish
34 Products found
M16X40MSSNZP
SET SCREW/N HEX ZINC PLATED GR4.8 STD 16X2X40mm 204/BAG DIN558 934
Fastbolt
R78,43
Per Kg
Excl. VAT
M16X40MSCSBNZP
CUP SQUARE NUT ZINC GR4 STD 16X2X40mm 172/BAG DIN603
Fastbolt
R132,42
Per Kg
Excl. VAT
M16X40MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 16X2X40mm 204/BAG DIN601
Fastbolt
R101,12
Per Kg
Excl. VAT
M16X40MSSN
SET SCREW/N HEX PLAIN GR4.8 STD 16X2X40mm 204/BAG DIN558 934
Fastbolt
R64,65
Per Kg
Excl. VAT
M16X40MSCNBN
COUNTERSUNK NIB/NUT N/HEX GR4 STD 16X2X40mm 236/BAG DIN604
Fastbolt
R86,65
Per Kg
Excl. VAT
M16X40MSSNHDG
SET SCREW/N HEX HDG GR4.8 STD 16X2X40mm 208/BAG DIN558 934
Fastbolt
R90,49
Per Kg
Excl. VAT
TBQ
R5,24
Excl. VAT
Each
R7,07
Excl. VAT
Each
R171,57
Excl. VAT
Each
R78,43
Per Kg
Excl. VAT
R132,42
Per Kg
Excl. VAT
R116,12
Per Kg
Excl. VAT
R101,12
Per Kg
Excl. VAT
R82,80
Per Kg
Excl. VAT
R64,65
Per Kg
Excl. VAT
R79,84
Per Kg
Excl. VAT
R86,65
Per Kg
Excl. VAT
R90,49
Per Kg
Excl. VAT
R11,60
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location