- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Surface Finish
31 Products found
M16X100MSUBNWZP
U-BOLT M16X2.0X100 IH157mm CC134mm TH60mm NUTS-WASHERS ZP
Fastbolt
R73,51
Excl. VAT
Each
M16X100MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 16X2X100mm 119/BAG DIN601
Fastbolt
R107,60
Per Kg
Excl. VAT
M16X100MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 16X2X100mm 117/BAG DIN601
Fastbolt
R93,33
Per Kg
Excl. VAT
M16X100MSUBNWHDG
U-BOLT M16X2.0X100 IH157mm CC134mm TH60mm NUTS-WASHERS HDG
Fastbolt
R79,15
Excl. VAT
Each
M16X100MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 16X2X100mm 140/BAG DIN605
Fastbolt
R95,70
Per Kg
Excl. VAT
M16X100MSCSBN
CUP SQUARE/NUT PLAIN GR4.8 STD 16X2X100mm 105/BAG DIN603
Fastbolt
R117,69
Per Kg
Excl. VAT
TBQ
R15,35
Excl. VAT
Each
TBQ
R22,15
Excl. VAT
Each
R73,51
Excl. VAT
Each
R107,60
Per Kg
Excl. VAT
R17,06
Excl. VAT
Each
R93,33
Per Kg
Excl. VAT
R77,08
Per Kg
Excl. VAT
R79,15
Excl. VAT
Each
R9,49
Excl. VAT
Each
R11,44
Excl. VAT
Each
R95,70
Per Kg
Excl. VAT
R117,69
Per Kg
Excl. VAT
R34,85
Excl. VAT
Each
TBQ
R30,19
Excl. VAT
Each
R69,80
Excl. VAT
Each
R53,96
Excl. VAT
Each
R11,70
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location