- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Series :
-
Category :
FILTER BY
Material
Length (mm)
Thread Type
M12X130MSBNYZP
BOLT/NUT HEX YZP GR4.8 STD 12X1.75X130mm 186/BAG DIN601
Fastbolt
R105,22
Per Kg
Excl. VAT
M10X110HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 STD 10X1.5X110mm DIN931
Fastbolt
R3,04
Excl. VAT
Each
M16X50MSBNYZP
BOLT/NUT HEX YELLOW ZINC PLATED GR4.8 STD 16X2X50mm 183/BAG DIN601
Fastbolt
R95,70
Per Kg
Excl. VAT
M18X120HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 18X2.5X120mm DIN931
Fastbolt
R14,56
Excl. VAT
Each
M12X1.50X35HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 MF 12X1.5X35mm DIN960
Fastbolt
R11,93
Excl. VAT
Each
M20X140HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 20X2.5X140mm DIN931
Fastbolt
R44,33
Excl. VAT
Each
M16X50X1.50HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 MF 16X1.5X50mm DIN960
Fastbolt
R59,20
Excl. VAT
Each
M8X150MSBNYZP
BOLT/NUT HEX YZP GR4.8 STD 8X1.25X150mm 386/BAG DIN601
Fastbolt
R25,32
Per Kg
Excl. VAT
M10X150MSBNYZP
BOLT/NUT HEX YZP GR4.8 STD 10X1.5X150mm 239/BAG DIN601
Fastbolt
R105,16
Per Kg
Excl. VAT
M20X130HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 20X2.5X130mm DIN931
Fastbolt
R42,41
Excl. VAT
Each
M16X65HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 STD 16X2X65mm DIN931
Fastbolt
R13,70
Excl. VAT
Each
TBQ
R105,22
Per Kg
Excl. VAT
R3,04
Excl. VAT
Each
R95,70
Per Kg
Excl. VAT
TBQ
R5,44
Per Kg
Excl. VAT
R4,04
Excl. VAT
Each
R14,56
Excl. VAT
Each
R31,64
Excl. VAT
Each
R11,93
Excl. VAT
Each
R44,33
Excl. VAT
Each
TBQ
R12,85
Excl. VAT
Each
R59,20
Excl. VAT
Each
R25,32
Per Kg
Excl. VAT
R105,16
Per Kg
Excl. VAT
R6,16
Excl. VAT
Each
R42,41
Excl. VAT
Each
R25,15
Excl. VAT
Each
R13,70
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location