- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Material :
-
Outside Diameter (mm) :
FILTER BY
Categories
Length (mm)
Thread Type
Type
33 Products found
M10X70HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X70mm DIN933
Fastbolt
R6,05
Excl. VAT
Each
M10X160HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X160mm DIN931
Fastbolt
R13,36
Excl. VAT
Each
M10X35HTS10.9YZP
SET SCREW HEX YELLOW ZINC PLATED GR10.9 STD 10X1.5X35mm DIN933
Fastbolt
R4,04
Excl. VAT
Each
M10X200HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X200mm DIN931
Fastbolt
R17,15
Excl. VAT
Each
M10X110HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 STD 10X1.5X110mm DIN931
Fastbolt
R3,04
Excl. VAT
Each
M10X80HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X80mm DIN933
Fastbolt
R9,31
Excl. VAT
Each
M10X30HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X30mm DIN933
Fastbolt
R3,38
Excl. VAT
Each
M10X20HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X20mm DIN933
Fastbolt
R2,83
Excl. VAT
Each
M10X60HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X60mm DIN933
Fastbolt
R5,33
Excl. VAT
Each
M10X65HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X65mm DIN933
Fastbolt
R5,64
Excl. VAT
Each
M10X60HTB10.9YZP
BOLT HEX YELLOW ZINC PLATED GR10.9 STD 10X1.5X60mm DIN931
Fastbolt
R12,19
Excl. VAT
Each
M10X25HTSYZP
SET SCREW HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X25mm DIN933
Fastbolt
R3,13
Excl. VAT
Each
R6,16
Excl. VAT
Each
R6,05
Excl. VAT
Each
R4,04
Excl. VAT
Each
R13,36
Excl. VAT
Each
R4,04
Excl. VAT
Each
TBQ
TBQ
TBQ
TBQ
R17,15
Excl. VAT
Each
R3,04
Excl. VAT
Each
R9,31
Excl. VAT
Each
R3,38
Excl. VAT
Each
R7,25
Excl. VAT
Each
R6,55
Excl. VAT
Each
R2,83
Excl. VAT
Each
R5,33
Excl. VAT
Each
R5,64
Excl. VAT
Each
R12,19
Excl. VAT
Each
R3,13
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location