- Home
- All Categories
- Fasteners
- Bolts
10 Products found
M12X90MSUBNWHDG
U-BOLT M12X2.0X90 IH134mm CC116mm TH50mm NUTS-WASHERS HDG
Fastbolt
R40,95
Excl. VAT
Each
M12X80MSUBNWHDG
U-BOLT M12X2.0X80 IH122mm CC104mm TH50mm NUTS-WASHERS HDG
Fastbolt
R39,00
Excl. VAT
Each
M12X40MSUBNWHDG
U-BOLT M12X2.0X40 IH78mm CC63mm TH40mm NUTS-WASHERS HDG
Fastbolt
R31,41
Excl. VAT
Each
M12X125MSUBNWHDG
U-BOLT M12X2.0X125 IH176mm CC156mm TH60mm NUTS-WASHERS HDG
Fastbolt
R47,61
Excl. VAT
Each
M12X25MSUBNWHDG
U-BOLT M12X2.0X25 IH63mm CC48mm TH40mm NUTS-WASHERS HDG
Fastbolt
R29,15
Excl. VAT
Each
M12X100MSUBNWHDG
U-BOLT M12X2.0X100 IH150mm CC130mm TH60mm NUTS-WASHERS HDG
Fastbolt
R43,64
Excl. VAT
Each
M12X150MSUBNWHDG
U-BOLT M12X2.0X150 IH202mm CC182mm TH60mm NUTS-WASHERS HDG
Fastbolt
R86,89
Excl. VAT
Each
M12X175MSUBNWHDG
U-BOLT M12X2.0X175 IH230mm CC210mm TH60mm NUTS-WASHERS HDG
Fastbolt
R60,17
Excl. VAT
Each
M12X200MSUBNWHDG
U-BOLT M12X2.0X200 IH260mm CC236mm TH60mm NUTS-WASHERS HDG
Fastbolt
R65,25
Excl. VAT
Each
M12X50MSUBNWHDG
U-BOLT M12X2.0X50 IH87mm CC74mm TH40mm NUTS-WASHERS HDG
Fastbolt
R33,24
Excl. VAT
Each
R40,95
Excl. VAT
Each
R39,00
Excl. VAT
Each
R31,41
Excl. VAT
Each
R47,61
Excl. VAT
Each
R29,15
Excl. VAT
Each
R43,64
Excl. VAT
Each
R86,89
Excl. VAT
Each
R60,17
Excl. VAT
Each
R65,25
Excl. VAT
Each
R33,24
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location