- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Thread Type :
-
Outside Diameter (mm) :
FILTER BY
Material
Length (mm)
M20X175MSUBNWHDG
U-BOLT M20X2.0X175 IH245mm CC219mm TH75mm NUTS-WASHERS HDG
Fastbolt
R240,19
Excl. VAT
Each
M20X300MSUBNWHDG
U-BOLT M20X2.0X300 IH372mm CC350mm TH75mm NUTS-WASHERS HDG
Fastbolt
R316,75
Excl. VAT
Each
M20X40MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X40mm 118/BAG DIN601
Fastbolt
R113,61
Per Kg
Excl. VAT
M20X500MSUBNWHDG
U-BOLT M20X2.0X500 IH575mm CC533mm TH100mm NUTS-WASHERS HDG
Fastbolt
R408,24
Excl. VAT
Each
M20X450MSUBNWHDG
U-BOLT M20X2.0X450 IH525mm CC483mm TH100mm NUTS-WASHERS HDG
Fastbolt
R3 831,61
Excl. VAT
Each
TBQ
R41,62
Excl. VAT
Each
R35,95
Excl. VAT
Each
R28,70
Excl. VAT
Each
R31,51
Excl. VAT
Each
R240,19
Excl. VAT
Each
R316,75
Excl. VAT
Each
R113,61
Per Kg
Excl. VAT
R6,96
Excl. VAT
Each
R21,28
Excl. VAT
Each
R125,58
Excl. VAT
Each
R6,52
Excl. VAT
Each
R17,16
Excl. VAT
Each
R60,60
Excl. VAT
Each
R0,01
Excl. VAT
Each
R408,24
Excl. VAT
Each
R3 831,61
Excl. VAT
Each
R61,47
Excl. VAT
Each
R30,09
Excl. VAT
Each
R88,56
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location