- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Type :
FILTER BY
Outside Diameter (mm)
Material
Length (mm)
M20X200MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X200mm 40/BAG DIN601
Fastbolt
R124,99
Per Kg
Excl. VAT
M10X45MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 10X1.5X45mm 541/BAG DIN601
Fastbolt
R113,40
Per Kg
Excl. VAT
M20X255MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X255mm 32/BAG DIN601
Fastbolt
R130,83
Per Kg
Excl. VAT
M20X150MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X150mm 54/BAG DIN601
Fastbolt
R105,05
Per Kg
Excl. VAT
M16X120MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 16X2X120mm 102/BAG DIN601
Fastbolt
R135,36
Per Kg
Excl. VAT
M12X55MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X55mm 337/BAG DIN601
Fastbolt
R104,16
Per Kg
Excl. VAT
M20X45MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X45mm 111/BAG DIN601
Fastbolt
R113,61
Per Kg
Excl. VAT
M30X125MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 30X3.5X125mm 26/BAG DIN601
Fastbolt
R134,68
Per Kg
Excl. VAT
R163,07
Excl. VAT
Each
R6,85
Excl. VAT
Each
R8,58
Excl. VAT
Each
R124,99
Per Kg
Excl. VAT
R113,40
Per Kg
Excl. VAT
R130,83
Per Kg
Excl. VAT
R26,21
Excl. VAT
Each
TBQ
R105,05
Per Kg
Excl. VAT
R135,36
Per Kg
Excl. VAT
TBQ
R4,43
Excl. VAT
Each
R129,99
Per Kg
Excl. VAT
R108,95
Per Kg
Excl. VAT
R104,16
Per Kg
Excl. VAT
R28,75
Per Kg
Excl. VAT
R113,61
Per Kg
Excl. VAT
R182,70
Per Kg
Excl. VAT
R134,68
Per Kg
Excl. VAT
R13,43
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location