- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Category :
FILTER BY
Categories
Material
Length (mm)
M16X55MSCNBNHDG
BOLT COUNTERSUNK NIB/NUT HDG GR4.8 16X2X55mm 201/BAG DIN604
Fastbolt
R68,19
Per Kg
Excl. VAT
M20X150MSUBNWHDG
U-BOLT M20X2.0X150 IH220mm CC193mm TH75mm NUTS-WASHERS HDG
Fastbolt
R225,34
Excl. VAT
Each
M10X80MSUBNWHDG
U-BOLT M10X2.0X80mm IH118mm CC102mm TH40mm NUTS-WASHERS HDG
Fastbolt
R24,41
Excl. VAT
Each
M10X32MSUBNWHDG
U-BOLT M10X2.0X32 IH69mm CC54mm TH30mm NUTS-WASHERS HDG
Fastbolt
R18,77
Excl. VAT
Each
M10X40MSUBNWHDG
U-BOLT M10X2.0X40 IH75mm CC60mm TH30mm NUTS-WASHERS HDG
Fastbolt
R19,38
Excl. VAT
Each
M16X65MSUBNWHDG
U-BOLT M16X2.0X65 IH115mm CC94mm TH50mm NUTS-WASHERS HDG
Fastbolt
R84,16
Excl. VAT
Each
M20X175MSUBNWHDG
U-BOLT M20X2.0X175 IH245mm CC219mm TH75mm NUTS-WASHERS HDG
Fastbolt
R240,19
Excl. VAT
Each
M20X200MSUBNWHDG
U-BOLT M20X2.0X200 IH270mm CC245mm TH75mm NUTS-WASHERS HDG
Fastbolt
R255,81
Excl. VAT
Each
M16X125MSUBNWHDG
U-BOLT M16X2.0X125 IH183mm CC160mm TH60mm NUTS-WASHERS HDG
Fastbolt
R104,43
Excl. VAT
Each
M16X150MSUBNWHDG
U-BOLT M16X2.0X150 IH209mm CC186mm TH60mm NUTS-WASHERS HDG
Fastbolt
R111,72
Excl. VAT
Each
M20X250MSUBNWHDG
U-BOLT M20X2.0X250 IH324mm CC297mm TH75mm NUTS-WASHERS HDG
Fastbolt
R282,85
Excl. VAT
Each
R0,09
Excl. VAT
Each
TBQ
TBQ
R0,70
Excl. VAT
Each
R3,93
Excl. VAT
Each
TBQ
R68,19
Per Kg
Excl. VAT
R4,03
Excl. VAT
Each
R225,34
Excl. VAT
Each
TBQ
R24,41
Excl. VAT
Each
R18,77
Excl. VAT
Each
R19,38
Excl. VAT
Each
R4,41
Excl. VAT
Each
R84,16
Excl. VAT
Each
R240,19
Excl. VAT
Each
R255,81
Excl. VAT
Each
R104,43
Excl. VAT
Each
R111,72
Excl. VAT
Each
R282,85
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location