- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Surface Finish :
-
Category :
-
Grade :
-
Outside Diameter (mm) :
FILTER BY
Categories
Length (mm)
34 Products found
M12X115MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X115mm 200/BAG DIN601
Fastbolt
R106,36
Per Kg
Excl. VAT
M12X150MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X150mm 162/BAG DIN601
Fastbolt
R104,42
Per Kg
Excl. VAT
M12X125MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X125mm 186/BAG DIN601
Fastbolt
R115,05
Per Kg
Excl. VAT
M12X50MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X50mm 357/BAG DIN601
Fastbolt
R164,75
Per Kg
Excl. VAT
M12X55MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X55mm 337/BAG DIN601
Fastbolt
R104,16
Per Kg
Excl. VAT
M12X75MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X75mm 275/BAG DIN601
Fastbolt
R69,36
Per Kg
Excl. VAT
M12X30MSSNHDG
SET SCREW/N HEX HDG GR4.8 STD 12X1.75X30mm 462/BAG DIN558 934
Fastbolt
R135,48
Per Kg
Excl. VAT
M12X100MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X100mm 222/BAG DIN601
Fastbolt
R72,41
Per Kg
Excl. VAT
M12X35MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X35mm 435/BAG DIN601
Fastbolt
R149,34
Per Kg
Excl. VAT
M12X90MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X90mm 241/BAG DIN601
Fastbolt
R97,14
Per Kg
Excl. VAT
M12X45MSSNHDG
SET SCREW/N HEX HDG GR4.8 STD 12X1.75X45mm 362/BAG DIN558 934
Fastbolt
R93,80
Per Kg
Excl. VAT
R4,80
Excl. VAT
Each
R4,11
Excl. VAT
Each
R4,55
Excl. VAT
Each
R7,00
Excl. VAT
Each
R5,84
Excl. VAT
Each
R1,78
Excl. VAT
Each
R106,36
Per Kg
Excl. VAT
R104,42
Per Kg
Excl. VAT
R115,05
Per Kg
Excl. VAT
R164,75
Per Kg
Excl. VAT
R104,16
Per Kg
Excl. VAT
R69,36
Per Kg
Excl. VAT
R135,48
Per Kg
Excl. VAT
TBQ
R72,41
Per Kg
Excl. VAT
R149,34
Per Kg
Excl. VAT
R97,14
Per Kg
Excl. VAT
R93,80
Per Kg
Excl. VAT
R4,99
Excl. VAT
Each
R2,70
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location