- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Series :
-
Surface Finish :
-
Thread Type :
FILTER BY
Categories
Outside Diameter (mm)
Material
Length (mm)
-
15.02
-
16.02
-
20.08
-
25.014
-
30.014
-
32.02
-
35.012
-
40.023
-
45.018
-
50.029
-
55.016
-
60.022
-
65.022
-
70.017
-
75.023
-
80.020
-
90.020
-
100.023
-
110.011
-
115.06
-
120.015
-
125.010
-
130.014
-
140.08
-
150.019
-
160.07
-
165.05
-
170.03
-
175.03
-
180.010
-
200.014
-
220.02
-
230.03
-
240.02
-
250.04
-
255.02
-
260.02
-
300.05
-
350.04
-
400.03
-
450.03
-
500.03
-
600.01
-
1000.01
Type
M20X45MSSNHDG
SET SCREW/N HEX HDG GR4.8 STD 20X2.5X45mm 111/BAG DIN558 934
Fastbolt
R89,31
Per Kg
Excl. VAT
M20X150MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X150mm 54/BAG DIN601
Fastbolt
R105,05
Per Kg
Excl. VAT
M16X120MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 16X2X120mm 102/BAG DIN601
Fastbolt
R135,36
Per Kg
Excl. VAT
M20X45MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X45mm 111/BAG DIN601
Fastbolt
R113,61
Per Kg
Excl. VAT
M30X125MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 30X3.5X125mm 26/BAG DIN601
Fastbolt
R134,68
Per Kg
Excl. VAT
M16X55MSCNBNHDG
BOLT COUNTERSUNK NIB/NUT HDG GR4.8 16X2X55mm 201/BAG DIN604
Fastbolt
R68,19
Per Kg
Excl. VAT
M8X65MSUBNWHDG
U-BOLT M8X2.0X65 IH100mm CC86mm TH35mm NUTS-WASHERS HDG
Fastbolt
R15,20
Excl. VAT
Each
R89,31
Per Kg
Excl. VAT
R105,05
Per Kg
Excl. VAT
R135,36
Per Kg
Excl. VAT
TBQ
R1,23
Excl. VAT
Each
R6,96
Excl. VAT
Each
R43,62
Excl. VAT
Each
R1Â 071,75
Excl. VAT
Each
TBQ
R113,61
Per Kg
Excl. VAT
R182,70
Per Kg
Excl. VAT
R134,68
Per Kg
Excl. VAT
R68,19
Per Kg
Excl. VAT
R10,06
Excl. VAT
Each
R10,49
Excl. VAT
Each
R11,16
Excl. VAT
Each
R11,68
Excl. VAT
Each
R12,22
Excl. VAT
Each
R15,20
Excl. VAT
Each
R13,42
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location