- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Categories
Outside Diameter (mm)
M10X200HTBYZP
BOLT HEX YELLOW ZINC PLATED GR8.8 STD 10X1.5X200mm DIN931
Fastbolt
R17,15
Excl. VAT
Each
M10X200MSCSBNZP
CUP SQUARE NUT ZINC GR4.8 STD 10X1.5X200mm 185/BAG DIN603
Fastbolt
R149,14
Per Kg
Excl. VAT
M20X200MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X200mm 40/BAG DIN601
Fastbolt
R124,99
Per Kg
Excl. VAT
M36X200MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 36X4X200mm 10/BAG DIN601
Fastbolt
R69,97
Per Kg
Excl. VAT
M12X200MSUBNWHDG
U-BOLT M12X2.0X200 IH260mm CC236mm TH60mm NUTS-WASHERS HDG
Fastbolt
R65,25
Excl. VAT
Each
M12X200MSBN
BOLT/NUT HEX PLAIN GR4.8 STD 12X1.75X200mm 128/BAG DIN601
Fastbolt
R84,91
Per Kg
Excl. VAT
M12X200MSCSBN
CUP SQUARE NUT PLAIN GR4 STD 12X1.75X200mm 127/BAG DIN603
Fastbolt
R127,20
Per Kg
Excl. VAT
TBQ
R17,15
Excl. VAT
Each
R306,42
Excl. VAT
Each
R24,40
Excl. VAT
Each
TBQ
TBQ
TBQ
R149,14
Per Kg
Excl. VAT
R45,04
Excl. VAT
Each
R1Â 071,75
Excl. VAT
Each
TBQ
R124,99
Per Kg
Excl. VAT
R69,97
Per Kg
Excl. VAT
R377,00
Excl. VAT
Each
R18,68
Excl. VAT
Each
R21,75
Excl. VAT
Each
R65,25
Excl. VAT
Each
R84,91
Per Kg
Excl. VAT
R127,20
Per Kg
Excl. VAT
R19,67
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location