- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Material :
-
Category :
FILTER BY
Categories
Series
Outside Diameter (mm)
Length (mm)
-
10.03
-
12.09
-
16.016
-
20.029
-
25.040
-
30.047
-
35.037
-
40.066
-
45.045
-
50.069
-
50.84
-
55.042
-
60.046
-
65.059
-
70.039
-
75.056
-
80.032
-
85.01
-
90.051
-
100.052
-
101.61
-
110.09
-
115.023
-
120.019
-
125.032
-
130.022
-
140.022
-
150.033
-
152.41
-
160.09
-
165.015
-
180.020
-
190.01
-
200.017
-
220.04
-
225.01
-
230.014
-
240.07
-
255.011
-
260.09
-
275.04
-
280.05
-
300.012
-
400.01
Thread Type
M36X200MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 36X4X200mm 10/BAG DIN601
Fastbolt
R69,97
Per Kg
Excl. VAT
M8X40MSSYZP
SET SCREW HEX YELLOW ZINC PLATED GR4.8 STD 8X1.25X40mm DIN558
Fastbolt
R1,44
Excl. VAT
Each
M8X60MSSYZP
SET SCREW HEX YELLOW ZINC PLATED GR4.8 STD 8X1.25X60mm DIN558
Fastbolt
R1,95
Excl. VAT
Each
M8X100MSSYZP
SET SCREW HEX YELLOW ZINC PLATED GR4.8 STD 8X1.25X100mm DIN558
Fastbolt
R3,12
Excl. VAT
Each
M10X70MSSYZP
SET SCREW HEX YELLOW ZINC PLATED GR4.8 STD 10X1.5X70mm DIN558
Fastbolt
R3,64
Excl. VAT
Each
M10X20MSSYZP
SET SCREW HEX YELLOW ZINC PLATED GR4.8 STD 10X1.5X20mm DIN558
Fastbolt
R1,76
Excl. VAT
Each
M16X120MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 16X2X120mm 102/BAG DIN601
Fastbolt
R135,36
Per Kg
Excl. VAT
R69,97
Per Kg
Excl. VAT
TBQ
TBQ
R6,64
Excl. VAT
Each
R1,44
Excl. VAT
Each
R56,34
Excl. VAT
Each
R0,39
Excl. VAT
Each
R1,95
Excl. VAT
Each
R3,12
Excl. VAT
Each
R3,64
Excl. VAT
Each
R25,02
Excl. VAT
Each
R20,66
Excl. VAT
Each
R1,76
Excl. VAT
Each
R1,49
Excl. VAT
Each
R220,84
Per Kg
Excl. VAT
TBQ
R5,44
Per Kg
Excl. VAT
TBQ
R85,46
Per Kg
Excl. VAT
R135,36
Per Kg
Excl. VAT
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location