- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Material
Surface Finish
20 Products found
M10X165MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 10X1.5X165mm 215/BAG DIN601
Fastbolt
R96,88
Per Kg
Excl. VAT
M20X165MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 20X2.5X165mm 50/BAG DIN601
Fastbolt
R95,74
Per Kg
Excl. VAT
M20X165MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X165mm 50/BAG DIN601
Fastbolt
R110,00
Per Kg
Excl. VAT
M24X165MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 24X3X165mm 33/BAG DIN601
Fastbolt
R102,39
Per Kg
Excl. VAT
M16X165MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 16X2X165mm 78/BAG DIN601
Fastbolt
R98,41
Per Kg
Excl. VAT
M12X165MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 12X1.75X165mm 149/BAG DIN601
Fastbolt
R104,33
Per Kg
Excl. VAT
M12X165MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 12X1.75X165mm 149/BAG DIN601
Fastbolt
R90,12
Per Kg
Excl. VAT
M12X165MSBN
BOLT/NUT HEX PLAIN GR4.8 STD 12X1.75X165mm 149/BAG DIN601
Fastbolt
R73,86
Per Kg
Excl. VAT
TBQ
R112,73
Excl. VAT
Each
R96,88
Per Kg
Excl. VAT
R80,69
Excl. VAT
Each
R126,04
Excl. VAT
Each
R80,63
Per Kg
Excl. VAT
R101,76
Per Kg
Excl. VAT
R79,49
Per Kg
Excl. VAT
R95,74
Per Kg
Excl. VAT
R110,00
Per Kg
Excl. VAT
R116,61
Per Kg
Excl. VAT
R102,39
Per Kg
Excl. VAT
R86,13
Per Kg
Excl. VAT
R94,46
Per Kg
Excl. VAT
R98,41
Per Kg
Excl. VAT
R82,16
Per Kg
Excl. VAT
R104,33
Per Kg
Excl. VAT
R90,12
Per Kg
Excl. VAT
R73,86
Per Kg
Excl. VAT
R94,26
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location