- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Length (mm) :
-
Material :
FILTER BY
Surface Finish
31 Products found
M20X130MSCSBN
CUP SQUARE/NUT PLAIN GR4.8 STD 20X2.5X130mm 54/BAG DIN603
Fastbolt
R138,06
Per Kg
Excl. VAT
M10X130MSCSBN
CUP SQUARE/NUT PLAIN GR4.8 STD 10X1.5X130mm 264/BAG DIN603
Fastbolt
R59,08
Per Kg
Excl. VAT
M20X130MSBNHDG
BOLT/NUT HEX HDG GR4.8 STD 20X2.5X130mm 58/BAG DIN601
Fastbolt
R100,25
Per Kg
Excl. VAT
M27X130MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 27X3X130mm 39/BAG DIN601
Fastbolt
R107,24
Per Kg
Excl. VAT
M20X130MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 20X2.5X130mm 58/BAG DIN601
Fastbolt
R98,60
Per Kg
Excl. VAT
M12X130MSBNYZP
BOLT/NUT HEX YZP GR4.8 STD 12X1.75X130mm 186/BAG DIN601
Fastbolt
R105,22
Per Kg
Excl. VAT
M8X130MSBNZP
BOLT/NUT HEX ZINC PLATED GR4.8 STD 8X1.25X130mm 442/BAG DIN601
Fastbolt
R106,92
Per Kg
Excl. VAT
M24X130MSBNZP
BOLT/NUT HEX ZINC PLATED GR4 STD 24X3X130mm 39/BAG DIN601
Fastbolt
R102,88
Per Kg
Excl. VAT
TBQ
TBQ
R6,35
Excl. VAT
Each
TBQ
R138,06
Per Kg
Excl. VAT
TBQ
R59,08
Per Kg
Excl. VAT
R132,50
Per Kg
Excl. VAT
R100,25
Per Kg
Excl. VAT
R107,24
Per Kg
Excl. VAT
R80,29
Per Kg
Excl. VAT
R98,60
Per Kg
Excl. VAT
R105,22
Per Kg
Excl. VAT
TBQ
TBQ
R106,92
Per Kg
Excl. VAT
R102,88
Per Kg
Excl. VAT
R103,91
Per Kg
Excl. VAT
R84,56
Per Kg
Excl. VAT
R117,88
Per Kg
Excl. VAT
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location