- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Material
Length (mm)
Surface Finish
M24X450MSUBNWZP
U-BOLT M24X2.0X450 IH525mm CC487mm TH100mm NUTS-WASHERS ZP
Fastbolt
R442,37
Excl. VAT
Each
M16X250MSUBNWHDG
U-BOLT M16X2.0X250 IH316mm CC292mm TH75mm NUTS-WASHERS HDG
Fastbolt
R146,56
Excl. VAT
Each
M20X175MSUBNWHDG
U-BOLT M20X2.0X175 IH245mm CC219mm TH75mm NUTS-WASHERS HDG
Fastbolt
R240,19
Excl. VAT
Each
M20X300MSUBNWHDG
U-BOLT M20X2.0X300 IH372mm CC350mm TH75mm NUTS-WASHERS HDG
Fastbolt
R316,75
Excl. VAT
Each
M10X65MSUBNWZP
U-BOLT M10X2.0X65mm IH104mm CC88mm TH40mm NUTS-WASHERS ZP
Fastbolt
R15,69
Excl. VAT
Each
M12X175MSUBNWZP
U-BOLT M12X2.0X175 IH230mm CC210mm TH60mm NUTS-WASHERS ZP
Fastbolt
R40,61
Excl. VAT
Each
M16X80MSUBNWZP
U-BOLT M16X2.0X80 IH129mm CC108mm TH60mm NUTS-WASHERS ZP
Fastbolt
R58,39
Excl. VAT
Each
R8,91
Excl. VAT
Each
TBQ
R8,41
Excl. VAT
Each
R21,87
Excl. VAT
Each
R32,72
Excl. VAT
Each
R442,37
Excl. VAT
Each
R146,56
Excl. VAT
Each
R240,19
Excl. VAT
Each
R316,75
Excl. VAT
Each
R14,35
Excl. VAT
Each
R7,25
Excl. VAT
Each
TBQ
R5,20
Excl. VAT
Each
R10,20
Excl. VAT
Each
R11,53
Excl. VAT
Each
R11,90
Excl. VAT
Each
R13,58
Excl. VAT
Each
R15,69
Excl. VAT
Each
R40,61
Excl. VAT
Each
R58,39
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location