- Home
- All Categories
- Fasteners
- Bolts
10 Products found
M12X50MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X50mm 425/BAG DIN605
Fastbolt
R79,62
Per Kg
Excl. VAT
M12X55MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X55mm 399/BAG DIN605
Fastbolt
R79,58
Per Kg
Excl. VAT
M12X25MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X25mm 598/BAG DIN605
Fastbolt
R79,79
Per Kg
Excl. VAT
M12X100MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X100mm 235/BAG DIN605
Fastbolt
R93,54
Per Kg
Excl. VAT
M12X75MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X75mm 310/BAG DIN605
Fastbolt
R79,41
Per Kg
Excl. VAT
M12X90MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X90mm 269/BAG DIN605
Fastbolt
R90,20
Per Kg
Excl. VAT
M12X45MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X45mm 460/BAG DIN605
Fastbolt
R79,67
Per Kg
Excl. VAT
M12X30MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X30mm 564/BAG DIN605
Fastbolt
R79,75
Per Kg
Excl. VAT
M12X65MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X65mm 347/BAG DIN605
Fastbolt
R79,50
Per Kg
Excl. VAT
M12X40MSPBN
PLOUGH BOLT/NUT PLAIN GR4 STD 12X1.75X40mm 489/BAG DIN605
Fastbolt
R79,71
Per Kg
Excl. VAT
R79,62
Per Kg
Excl. VAT
R79,58
Per Kg
Excl. VAT
R79,79
Per Kg
Excl. VAT
R93,54
Per Kg
Excl. VAT
R79,41
Per Kg
Excl. VAT
R90,20
Per Kg
Excl. VAT
R79,67
Per Kg
Excl. VAT
R79,75
Per Kg
Excl. VAT
R79,50
Per Kg
Excl. VAT
R79,71
Per Kg
Excl. VAT
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location