- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
Bore Type
23264 CAW33C3 BTC
SPHERICAL ROLLER BEARING PARALLEL C3 CLEARANCE 320X580X208MM BTC
BTC
R22 365,02
Excl. VAT
Each
22313 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 65X140X48MM BTC
BTC
R1 199,73
Excl. VAT
Each
22312 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 60X130X46MM BTC
BTC
R1 022,72
Excl. VAT
Each
23218 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 90X160X52.4MM BTC
BTC
R1 822,19
Excl. VAT
Each
22312 MBKW33C3 B
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 60X130X46MM BTC
BTC
R1 075,76
Excl. VAT
Each
22313 MBKW33C3 B
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 65X140X48MM BTC
BTC
R1 269,07
Excl. VAT
Each
22314 MBKW33C3 B
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 70X150X51MM BTC
BTC
R217,50
Excl. VAT
Each
23222 MBKW33C3 B
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 110X200X69.8MM BTC
BTC
R3 545,63
Excl. VAT
Each
22217 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 85X150X36MM BTC
BTC
R976,49
Excl. VAT
Each
22308 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 40X90X33MM BTC
BTC
R656,07
Excl. VAT
Each
22309 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 45X100X36MM BTC
BTC
R751,15
Excl. VAT
Each
22311 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 55X120X43MM BTC
BTC
R916,60
Excl. VAT
Each
22315 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 75X160X55MM BTC
BTC
R1 414,04
Excl. VAT
Each
22316 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 80X170X58MM BTC
BTC
R1 730,27
Excl. VAT
Each
22317 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 85X180X60MM BTC
BTC
R2 026,52
Excl. VAT
Each
22318 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 90X190X64MM BTC
BTC
R2 125,28
Excl. VAT
Each
22320 MBW33C3 BTC
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 100X215X73MM BTC
BTC
R3 008,61
Excl. VAT
Each
22319 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 95X200X67MM BTC
BTC
R1 696,57
Excl. VAT
Each
23024 MBW33C3 BT
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 120X180X46MM BTC
BTC
R1 664,60
Excl. VAT
Each
22308 MBKW33C3 BTC
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 40X90X33MM BTC
BTC
R639,79
Excl. VAT
Each
R22 365,02
Excl. VAT
Each
R1 199,73
Excl. VAT
Each
R1 022,72
Excl. VAT
Each
R1 822,19
Excl. VAT
Each
R1 075,76
Excl. VAT
Each
R1 269,07
Excl. VAT
Each
R217,50
Excl. VAT
Each
R3 545,63
Excl. VAT
Each
R976,49
Excl. VAT
Each
R656,07
Excl. VAT
Each
R751,15
Excl. VAT
Each
R916,60
Excl. VAT
Each
R1 414,04
Excl. VAT
Each
R1 730,27
Excl. VAT
Each
R2 026,52
Excl. VAT
Each
R2 125,28
Excl. VAT
Each
R3 008,61
Excl. VAT
Each
R1 696,57
Excl. VAT
Each
R1 664,60
Excl. VAT
Each
R639,79
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location