- Home
- All Categories
- Bearings
- Roller
- Spherical
23 Products found
23244 BC3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 220 x 400 x 144 mm, NTN.
NTN
R34 356,30
Excl. VAT
Each
23044 BL1C3 NTN
Spherical roller bearing, parallel bore, brass cage, C3 clearance, 220 x 340 x 90 mm, NTN.
NTN
R21 436,52
Excl. VAT
Each
24144 BC3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 220 x 370 x 150 mm, NTN.
NTN
R32 567,38
Excl. VAT
Each
23144 BKC3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 220 x 370 x 120 mm, NTN.
NTN
R25 205,47
Excl. VAT
Each
24144 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 220X370X150MM TIMKEN
Timken
R42 414,53
Excl. VAT
Each
24144 CAMK30E4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 220X370X150MM
NSK
R27 884,51
Excl. VAT
Each
23144 BC3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 220 x 370 x 120 mm, NTN.
NTN
R27 323,05
Excl. VAT
Each
23044 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 220X340X90MM TIMKEN
Timken
R18 933,90
Excl. VAT
Each
23044 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 220X340X90MM
NSK
R15 317,42
Excl. VAT
Each
23044 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 220X340X90MM
NSK
R13 752,86
Excl. VAT
Each
23244 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 220X400X144MM
NSK
R26 411,56
Excl. VAT
Each
23244 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 220X400X144MM
NSK
R26 411,56
Excl. VAT
Each
22344 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 220X460X145MM
NSK
R77 822,27
Excl. VAT
Each
22344 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 220X460X145MM
NSK
R84 589,42
Excl. VAT
Each
23144 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 220X370X120MM
NSK
R18 858,73
Excl. VAT
Each
23144 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 220X370X120MM
NSK
R19 376,81
Excl. VAT
Each
23144 KEJW33C3 TIM
SPHERICAL ROLLER BRG TAPERED STEEL C3 CLEARANCE 220X370X120MM TIMKEN
Timken
R25 300,56
Excl. VAT
Each
23144 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 220X370X120MM TIMKEN
Timken
R25 300,56
Excl. VAT
Each
24144 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 220X370X150MM
NSK
R25 036,34
Excl. VAT
Each
24044 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 220X340X118MM
NSK
R18 289,73
Excl. VAT
Each
R34 356,30
Excl. VAT
Each
23044 BL1C3 NTN
Spherical roller bearing, parallel bore, brass cage, C3 clearance, 220 x 340 x 90 mm, NTN.
NTN
R21 436,52
Excl. VAT
Each
R32 567,38
Excl. VAT
Each
R25 205,47
Excl. VAT
Each
R42 414,53
Excl. VAT
Each
R27 884,51
Excl. VAT
Each
R27 323,05
Excl. VAT
Each
R18 933,90
Excl. VAT
Each
R15 317,42
Excl. VAT
Each
R13 752,86
Excl. VAT
Each
R26 411,56
Excl. VAT
Each
R26 411,56
Excl. VAT
Each
R77 822,27
Excl. VAT
Each
R84 589,42
Excl. VAT
Each
R18 858,73
Excl. VAT
Each
R19 376,81
Excl. VAT
Each
R25 300,56
Excl. VAT
Each
R25 300,56
Excl. VAT
Each
R25 036,34
Excl. VAT
Each
R18 289,73
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location