- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Categories
Bearing Type
Seal Type
Bore Type
Precision
27 Products found
23236 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 180X320X112MM
NSK
R13 435,82
Excl. VAT
Each
24036 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 180X280X100MM
NSK
R9 910,68
Excl. VAT
Each
24036 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 180X280X100MM
NSK
R6 359,15
Excl. VAT
Each
24136 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 180X300X118MM
NSK
R14 602,58
Excl. VAT
Each
22336 CAME4
SPHERICAL ROLLER BEARING PARALLEL BRASS CN CLEARANCE 180X380X126MM
NSK
R26 218,28
Excl. VAT
Each
22236 CDKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 180X320X86MM
NSK
R11 371,96
Excl. VAT
Each
22336 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 180X380X126MM
NSK
R32 062,05
Excl. VAT
Each
23036 CDKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 180X280X74MM
NSK
R7 311,97
Excl. VAT
Each
23236 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 180X320X112MM
NSK
R8 720,45
Excl. VAT
Each
22336 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 180X380X126MM
NSK
R26 218,26
Excl. VAT
Each
22336 CAME7
SPHERICAL ROLLER BEARING BRASS OIL GROOVE CN CLEARANCE 180X380X126MM
NSK
R24 608,90
Excl. VAT
Each
22336 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 180X380X126MM
NSK
R25 555,29
Excl. VAT
Each
22336 CAMKE4
SPHERICAL ROLLER BEARING TAPERED BRASS CN CLEARANCE 180X380X126MM
NSK
R26 185,49
Excl. VAT
Each
23136 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 180X300X96MM
NSK
R10 477,44
Excl. VAT
Each
23136 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 180X300X96MM
NSK
R10 477,44
Excl. VAT
Each
24136 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 180X300X118MM
NSK
R13 111,04
Excl. VAT
Each
23136 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 180X300X96MM
NSK
R11 974,19
Excl. VAT
Each
23136 CKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 180X300X96MM
NSK
R11 974,19
Excl. VAT
Each
23036 CDE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 180X280X74MM
NSK
R6 726,99
Excl. VAT
Each
R13 435,82
Excl. VAT
Each
R9 910,68
Excl. VAT
Each
R6 359,15
Excl. VAT
Each
R14 602,58
Excl. VAT
Each
R26 218,28
Excl. VAT
Each
R11 371,96
Excl. VAT
Each
R32 062,05
Excl. VAT
Each
R7 311,97
Excl. VAT
Each
R8 720,45
Excl. VAT
Each
R26 218,26
Excl. VAT
Each
R24 608,90
Excl. VAT
Each
R25 555,29
Excl. VAT
Each
R26 185,49
Excl. VAT
Each
R14 783,58
Excl. VAT
Each
R10 477,44
Excl. VAT
Each
R10 477,44
Excl. VAT
Each
R13 111,04
Excl. VAT
Each
R11 974,19
Excl. VAT
Each
R11 974,19
Excl. VAT
Each
R6 726,99
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location