- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Categories
Bearing Type
Seal Type
Bore Type
Precision
22232 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 160 x 290 x 80 mm, NTN.
NTN
R10 865,63
Excl. VAT
Each
22232 EJW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL STEEL C3 CLEARANCE 160X290X80MM TIMKEN
Timken
R11 658,41
Excl. VAT
Each
23032 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 240 x 60 mm, NTN.
NTN
R7 117,44
Excl. VAT
Each
23032 CDE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 160X240X60MM
NSK
R5 085,74
Excl. VAT
Each
23132 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 160X270X86MM
NSK
R7 722,08
Excl. VAT
Each
22232 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 290 x 80 mm, NTN.
NTN
R10 758,57
Excl. VAT
Each
24132 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 270 x 109 mm, NTN.
NTN
R13 574,03
Excl. VAT
Each
24132 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 160X270X109MM
NSK
R5 206,70
Excl. VAT
Each
22232 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 160 x 290 x 80 mm, NTN.
NTN
R10 849,85
Excl. VAT
Each
23132 EJW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL STEEL C3 CLEARANCE 160X270X86MM TIMKEN
Timken
R10 623,01
Excl. VAT
Each
24032 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 160 x 240 x 80 mm, NTN.
NTN
R8 797,68
Excl. VAT
Each
24032 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 160 x 240 x 80 mm, NTN.
NTN
R9 798,52
Excl. VAT
Each
24132 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 160 x 270 x 109 mm, NTN.
NTN
R13 574,03
Excl. VAT
Each
23132 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 270 x 86 mm, NTN.
NTN
R11 864,19
Excl. VAT
Each
24032 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 240 x 80 mm, NTN.
NTN
R8 797,68
Excl. VAT
Each
23232 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 160 x 290 x 104 mm, NTN.
NTN
R15 932,53
Excl. VAT
Each
24132 BD1C4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 160 x 270 x 109 mm, NTN.
NTN
R7 045,00
Excl. VAT
Each
23232 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 160 x 290 x 104 mm, NTN.
NTN
R15 043,92
Excl. VAT
Each
24032 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 160X240X80MM
NSK
R2 904,41
Excl. VAT
Each
23232 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 160 x 290 x 104 mm, NTN.
NTN
R7 327,84
Excl. VAT
Each
R10 865,63
Excl. VAT
Each
R11 658,41
Excl. VAT
Each
R7 117,44
Excl. VAT
Each
R5 085,74
Excl. VAT
Each
R7 722,08
Excl. VAT
Each
R10 758,57
Excl. VAT
Each
R13 574,03
Excl. VAT
Each
R5 206,70
Excl. VAT
Each
R10 849,85
Excl. VAT
Each
R10 623,01
Excl. VAT
Each
R8 797,68
Excl. VAT
Each
R9 798,52
Excl. VAT
Each
R13 574,03
Excl. VAT
Each
R11 864,19
Excl. VAT
Each
R8 797,68
Excl. VAT
Each
R15 932,53
Excl. VAT
Each
R7 045,00
Excl. VAT
Each
R15 043,92
Excl. VAT
Each
R2 904,41
Excl. VAT
Each
R7 327,84
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location