- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Categories
Bearing Type
Series
Bore Type
Precision
Material
Design
18 Products found
23132 MBW33C3 RO
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X270X86MM ROLLWAY
Rollway
R6 971,53
Excl. VAT
Each
23232 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X290X104MM ROLLWAY
Rollway
R9 359,03
Excl. VAT
Each
29332 EM ROL
SPHERICAL ROLLER THRUST BEARING BRASS 160X270X67MM ROLLWAY
Rollway
R10 988,61
Excl. VAT
Each
22232 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X290X80MM TIMKEN
Timken
R11 872,29
Excl. VAT
Each
22232 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 160X290X80MM
NSK
R10 691,46
Excl. VAT
Each
22232 MBKW33C3 B
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 160X290X80MM BTC
BTC
R6 781,51
Excl. VAT
Each
22232 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X290X80MM ROLLWAY
Rollway
R8 301,46
Excl. VAT
Each
23032 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X240X60MM TIMKEN
Timken
R7 740,96
Excl. VAT
Each
22332 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 160X340X114MM
NSK
R20 129,12
Excl. VAT
Each
22332 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 160X340X114MM TIMKEN
Timken
R25 940,30
Excl. VAT
Each
22332 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X340X114MM TIMKEN
Timken
R27 366,00
Excl. VAT
Each
22332 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 160X340X114MM
NSK
R20 204,96
Excl. VAT
Each
22332 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 160X340X114MM
NSK
R20 729,45
Excl. VAT
Each
22332 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X340X114MM ROLLWAY
Rollway
R16 724,92
Excl. VAT
Each
23232 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X290X104MM TIMKEN
Timken
R16 947,82
Excl. VAT
Each
23232 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X290X104MM TIMKEN
Timken
R16 947,82
Excl. VAT
Each
R6 971,53
Excl. VAT
Each
R9 359,03
Excl. VAT
Each
R10 988,61
Excl. VAT
Each
TBQ
TBQ
R11 872,29
Excl. VAT
Each
R10 691,46
Excl. VAT
Each
R6 781,51
Excl. VAT
Each
R8 301,46
Excl. VAT
Each
R7 740,96
Excl. VAT
Each
R20 129,12
Excl. VAT
Each
R25 940,30
Excl. VAT
Each
R27 366,00
Excl. VAT
Each
R20 204,96
Excl. VAT
Each
R20 729,45
Excl. VAT
Each
R16 724,92
Excl. VAT
Each
R16 947,82
Excl. VAT
Each
R16 947,82
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location