- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Categories
Bearing Type
Seal Type
Bore Type
Precision
33 Products found
23120 EJW33C4 TIM
SPHERICAL ROLLER BEARING PARALLEL C4 CLEARANCE 100X165X52MM TIMKEN
Timken
R4 017,50
Excl. VAT
Each
23120 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 100X165X52MM
NSK
R2 088,84
Excl. VAT
Each
23220 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 100 x 180 x 60.3 mm, NTN.
NTN
R5 103,30
Excl. VAT
Each
22220 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 100 x 180 x 46 mm, NTN.
NTN
R3 755,74
Excl. VAT
Each
22220 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 100 x 180 x 46 mm, NTN.
NTN
R3 709,31
Excl. VAT
Each
23120 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 100 x 165 x 52 mm, NTN.
NTN
R2 375,19
Excl. VAT
Each
23120 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 100 x 165 x 52 mm, NTN.
NTN
R4 030,63
Excl. VAT
Each
23220 BD1 NTN
Spherical roller bearing, parallel bore, C0 clearance, 100 x 180 x 60.3 mm, NTN.
NTN
R5 095,41
Excl. VAT
Each
23220 EJW33C4 TIM
SPHERICAL ROLLER BRG PARALLEL STEEL C4 CLEARANCE 100X180X60.3MM TIMKEN
Timken
R5 008,16
Excl. VAT
Each
22220 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 100 x 180 x 46 mm, NTN.
NTN
R3 709,31
Excl. VAT
Each
23220 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 100 x 180 x 60.3 mm, NTN.
NTN
R5 119,69
Excl. VAT
Each
23120 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 100 x 165 x 52 mm, NTN.
NTN
R4 490,43
Excl. VAT
Each
22220 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 100 x 180 x 46 mm, NTN.
NTN
R3 709,31
Excl. VAT
Each
23120 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 100X165X52MM
NSK
R2 819,97
Excl. VAT
Each
22220 CDKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 100X180X46MM
NSK
R2 265,61
Excl. VAT
Each
23220 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 100X180X60.3MM
NSK
R3 935,78
Excl. VAT
Each
22220 CDE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 100X180X46MM
NSK
R2 462,62
Excl. VAT
Each
22320 KEJW33C3 TIM
SPHERICAL ROLLER BRG TAPERED STEEL C3 CLEARANCE 100X215X73MM TIMKEN
Timken
R6 990,67
Excl. VAT
Each
23120 EJW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL STEEL C3 CLEARANCE 100X165X52MM TIMKEN
Timken
R4 017,50
Excl. VAT
Each
23120 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 100X165X52MM
NSK
R3 130,53
Excl. VAT
Each
R4 017,50
Excl. VAT
Each
R2 088,84
Excl. VAT
Each
23220 BD1C3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 100 x 180 x 60.3 mm, NTN.
NTN
R5 103,30
Excl. VAT
Each
R3 755,74
Excl. VAT
Each
R3 709,31
Excl. VAT
Each
R2 375,19
Excl. VAT
Each
R4 030,63
Excl. VAT
Each
R5 095,41
Excl. VAT
Each
R5 008,16
Excl. VAT
Each
R3 709,31
Excl. VAT
Each
23220 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 100 x 180 x 60.3 mm, NTN.
NTN
R5 119,69
Excl. VAT
Each
R4 490,43
Excl. VAT
Each
R3 709,31
Excl. VAT
Each
R2 819,97
Excl. VAT
Each
R2 265,61
Excl. VAT
Each
R3 935,78
Excl. VAT
Each
R2 462,62
Excl. VAT
Each
R6 990,67
Excl. VAT
Each
R4 017,50
Excl. VAT
Each
R3 130,53
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location