- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
21311 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 55X120X29MM ROLLWAY
Rollway
R886,24
Excl. VAT
Each
22309 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 45X100X36MM ROLLWAY
Rollway
R805,56
Excl. VAT
Each
239-900 MBKW33C3 ROL
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 900X1180X206MM ROLLWAY
Rollway
R469 580,68
Excl. VAT
Each
238-1000 CAKW33C3 RO
SPHERICAL ROLLER BEARING TAPERED C3 CLEARANCE 1000X1220X165MM ROLLWAY
Rollway
R636 397,88
Excl. VAT
Each
22317 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 85X180X60MM ROLLWAY
Rollway
R2 427,84
Excl. VAT
Each
23232 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X290X104MM ROLLWAY
Rollway
R9 359,03
Excl. VAT
Each
230-530 CAKC3W33 ROL
SPHERICAL ROLLER BEARING TAPERED C3 CLEARANCE 530X780X185MM ROLLWAY
Rollway
TBQ
22206 KW33C3 ROL
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 30X62X20MM ROLLWAY
Rollway
R444,62
Excl. VAT
Each
22208 KW33C3 ROL
SPHERICAL RLR BEARING TAPERED STEEL C3 CLEARANCE 40X80X23MM ROLLWAY
Rollway
R472,09
Excl. VAT
Each
22207 MBKW33C3 R
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 35X72X23MM ROLLWAY
Rollway
R477,01
Excl. VAT
Each
22209 MBKW33 ROL
SPHERICAL ROLLER BEARING TAPERED BRASS CN CLEARANCE 45X85X23MM ROLLWAY
Rollway
R530,03
Excl. VAT
Each
22209 MBKW33C3 R
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 45X85X23MM ROLLWAY
Rollway
R530,03
Excl. VAT
Each
22210 MBKW33C3 R
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 50X90X23MM ROLLWAY
Rollway
R516,30
Excl. VAT
Each
22310 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 50X110X40MM ROLLWAY
Rollway
R313,13
Excl. VAT
Each
22311 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 55X120X43MM ROLLWAY
Rollway
R1 018,86
Excl. VAT
Each
22313 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 65X140X48MM ROLLWAY
Rollway
R1 372,50
Excl. VAT
Each
22312 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 60X130X46MM ROLLWAY
Rollway
R1 183,23
Excl. VAT
Each
22316 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 80X170X58MM ROLLWAY
Rollway
R2 087,50
Excl. VAT
Each
22318 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 90X190X64MM ROLLWAY
Rollway
R2 991,09
Excl. VAT
Each
23138 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 190X320X104MM ROLLWAY
Rollway
R11 437,53
Excl. VAT
Each
R886,24
Excl. VAT
Each
R805,56
Excl. VAT
Each
R469 580,68
Excl. VAT
Each
R636 397,88
Excl. VAT
Each
R2 427,84
Excl. VAT
Each
R9 359,03
Excl. VAT
Each
TBQ
R444,62
Excl. VAT
Each
R472,09
Excl. VAT
Each
R477,01
Excl. VAT
Each
R530,03
Excl. VAT
Each
R530,03
Excl. VAT
Each
R516,30
Excl. VAT
Each
R313,13
Excl. VAT
Each
R1 018,86
Excl. VAT
Each
R1 372,50
Excl. VAT
Each
R1 183,23
Excl. VAT
Each
R2 087,50
Excl. VAT
Each
R2 991,09
Excl. VAT
Each
R11 437,53
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location