- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
21316 KD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 80 x 170 x 39 mm, NTN.
NTN
R2 803,76
Excl. VAT
Each
22209 CKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 45 x 85 x 23 mm, NTN.
NTN
R1 352,72
Excl. VAT
Each
22207 CKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 35 x 72 x 23 mm, NTN.
NTN
R1 031,22
Excl. VAT
Each
22212 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 60 x 110 x 28 mm, NTN.
NTN
R1 641,86
Excl. VAT
Each
22216 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 80 x 140 x 33 mm, NTN.
NTN
R1 879,80
Excl. VAT
Each
22218 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 90 x 160 x 40 mm, NTN.
NTN
R2 119,23
Excl. VAT
Each
22313 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 65 x 140 x 48 mm, NTN.
NTN
R2 347,86
Excl. VAT
Each
22317 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 85 x 180 x 60 mm, NTN.
NTN
R2 754,04
Excl. VAT
Each
23024 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 120 x 180 x 46 mm, NTN.
NTN
R4 698,14
Excl. VAT
Each
23028 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 140 x 210 x 53 mm, NTN.
NTN
R5 823,03
Excl. VAT
Each
23034 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 170 x 260 x 67 mm, NTN.
NTN
R9 300,13
Excl. VAT
Each
23224 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 120 x 215 x 76 mm, NTN.
NTN
R7 828,55
Excl. VAT
Each
23232 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 160 x 290 x 104 mm, NTN.
NTN
R7 327,84
Excl. VAT
Each
23240 BKC3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 200 x 360 x 128 mm, NTN.
NTN
R24 263,66
Excl. VAT
Each
22208 CKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 40 x 80 x 23 mm, NTN.
NTN
R1 261,89
Excl. VAT
Each
22216 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 80 x 140 x 33 mm, NTN.
NTN
R1 879,77
Excl. VAT
Each
22217 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 85 x 150 x 36 mm, NTN.
NTN
R2 059,46
Excl. VAT
Each
22219 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 95 x 170 x 43 mm, NTN.
NTN
R3 510,93
Excl. VAT
Each
22222 BKD1 NTN
Spherical roller bearing, tapered bore, C0 clearance, 110 x 200 x 53 mm, NTN.
NTN
R3 406,40
Excl. VAT
Each
22222 BKD1C3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 110 x 200 x 53 mm, NTN.
NTN
R4 737,75
Excl. VAT
Each
R2 803,76
Excl. VAT
Each
R1 352,72
Excl. VAT
Each
R1 031,22
Excl. VAT
Each
R1 641,86
Excl. VAT
Each
R1 879,80
Excl. VAT
Each
R2 119,23
Excl. VAT
Each
R2 347,86
Excl. VAT
Each
R2 754,04
Excl. VAT
Each
R4 698,14
Excl. VAT
Each
R5 823,03
Excl. VAT
Each
R9 300,13
Excl. VAT
Each
R7 828,55
Excl. VAT
Each
R7 327,84
Excl. VAT
Each
R24 263,66
Excl. VAT
Each
R1 261,89
Excl. VAT
Each
R1 879,77
Excl. VAT
Each
R2 059,46
Excl. VAT
Each
R3 510,93
Excl. VAT
Each
R3 406,40
Excl. VAT
Each
R4 737,75
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location