- Home
- All Categories
- Bearings
- Roller
- Spherical
APPLIED FILTERS
-
Brand :
-
Bore Type :
-
Bearing Type :
-
Clearance :
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
24132 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 160X270X109MM
NSK
R5 206,70
Excl. VAT
Each
22322 MC4 SLIP
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 110X240X80MM
NSK
R9 442,22
Excl. VAT
Each
22336 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 180X380X126MM
NSK
R32 062,05
Excl. VAT
Each
23126 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 130X210X64MM
NSK
R0,30
Excl. VAT
Each
23134 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X280X88MM
NSK
R13 135,94
Excl. VAT
Each
24140 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 200X340X140MM
NSK
R16 708,28
Excl. VAT
Each
22322 CAME4C4
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 110X240X80MM
NSK
R7 831,00
Excl. VAT
Each
24028 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 140X210X69MM
NSK
R5 081,92
Excl. VAT
Each
24034 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X260X90MM
NSK
R7 954,10
Excl. VAT
Each
23328 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL BRASS SHAKER SCREEN 140X300X118MM
NSK
R20 649,84
Excl. VAT
Each
23940 ME4C4
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 200X280X60MM
NSK
R17 642,80
Excl. VAT
Each
23026 CDE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 130X200X52MM
NSK
R4 126,71
Excl. VAT
Each
22314 CDE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 70X150X51MM
NSK
R2 559,62
Excl. VAT
Each
22338 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 190X400X132MM
NSK
R25 886,71
Excl. VAT
Each
22332 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 160X340X114MM
NSK
R18 795,31
Excl. VAT
Each
22340 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 200X420X138MM
NSK
R61 539,84
Excl. VAT
Each
22313 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 65X140X48MM
NSK
R3 129,36
Excl. VAT
Each
22316 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 80X170X58MM
NSK
R4 399,32
Excl. VAT
Each
23120 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 100X165X52MM
NSK
R3 130,53
Excl. VAT
Each
22319 CAME4C4
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 95X200X67MM
NSK
R5 399,66
Excl. VAT
Each
R5 206,70
Excl. VAT
Each
R9 442,22
Excl. VAT
Each
R32 062,05
Excl. VAT
Each
R0,30
Excl. VAT
Each
R13 135,94
Excl. VAT
Each
R16 708,28
Excl. VAT
Each
R7 831,00
Excl. VAT
Each
R5 081,92
Excl. VAT
Each
R7 954,10
Excl. VAT
Each
R20 649,84
Excl. VAT
Each
R17 642,80
Excl. VAT
Each
R4 126,71
Excl. VAT
Each
R2 559,62
Excl. VAT
Each
R25 886,71
Excl. VAT
Each
R18 795,31
Excl. VAT
Each
R61 539,84
Excl. VAT
Each
R3 129,36
Excl. VAT
Each
R4 399,32
Excl. VAT
Each
R3 130,53
Excl. VAT
Each
R5 399,66
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location