- Home
- All Categories
- Bearings
- Roller
- Spherical
APPLIED FILTERS
-
Brand :
-
Bearing Type :
-
Outside Diameter (mm) :
FILTER BY
Bore Type
28 Products found
23124 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 120X200X62MM
NSK
R4 515,37
Excl. VAT
Each
23124 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 120X200X62MM
NSK
R4 658,29
Excl. VAT
Each
24026 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 130X200X69MM
NSK
R4 348,85
Excl. VAT
Each
24026 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 130X200X69MM
NSK
R4 843,59
Excl. VAT
Each
24124 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 120X200X80MM
NSK
R5 347,94
Excl. VAT
Each
22222 CDE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 110X200X53MM
NSK
R3 512,06
Excl. VAT
Each
22222 CDE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 110X200X53MM
NSK
R4 155,90
Excl. VAT
Each
22222 CDE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 110X200X53MM
NSK
R2 291,57
Excl. VAT
Each
21319 ME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 95X200X45MM
NSK
R4 636,58
Excl. VAT
Each
21319 MKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 95X200X45MM
NSK
R4 636,58
Excl. VAT
Each
23222 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 110X200X69.8MM
NSK
R4 881,48
Excl. VAT
Each
23222 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 110X200X69.8MM
NSK
R5 909,63
Excl. VAT
Each
22319 CAME4
SPHERICAL ROLLER BEARING PARALLEL BRASS CN CLEARANCE 95X200X67MM
NSK
R5 688,95
Excl. VAT
Each
22319 CAME4C4
SPHERICAL ROLLER BEARING PARALLEL BRASS C4 CLEARANCE 95X200X67MM
NSK
R5 399,66
Excl. VAT
Each
22319 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 95X200X67MM
NSK
R5 107,90
Excl. VAT
Each
22319 ME4C4U15
SPHERICAL ROLLER BEARING PARALLEL SHAKER SCREEN BRASS C4 95X200X67MM
NSK
R5 693,48
Excl. VAT
Each
23222 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 110X200X69.8MM
NSK
R4 881,48
Excl. VAT
Each
22319 CAMKE4
SPHERICAL ROLLER BEARING TAPERED BRASS CN CLEARANCE 95X200X67MM
NSK
R2 470,57
Excl. VAT
Each
22319 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 95X200X67MM
NSK
R5 688,95
Excl. VAT
Each
23026 CDE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 130X200X52MM
NSK
R3 408,78
Excl. VAT
Each
R4 515,37
Excl. VAT
Each
R4 658,29
Excl. VAT
Each
R4 348,85
Excl. VAT
Each
R4 843,59
Excl. VAT
Each
R5 347,94
Excl. VAT
Each
R3 512,06
Excl. VAT
Each
R4 155,90
Excl. VAT
Each
R2 291,57
Excl. VAT
Each
R4 636,58
Excl. VAT
Each
R4 636,58
Excl. VAT
Each
R4 881,48
Excl. VAT
Each
R5 909,63
Excl. VAT
Each
R5 688,95
Excl. VAT
Each
R5 399,66
Excl. VAT
Each
R5 107,90
Excl. VAT
Each
R5 693,48
Excl. VAT
Each
R4 881,48
Excl. VAT
Each
R2 470,57
Excl. VAT
Each
R5 688,95
Excl. VAT
Each
R3 408,78
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location