- Home
- All Categories
- Bearings
- Roller
- Spherical
APPLIED FILTERS
-
Brand :
-
Bearing Type :
-
Inside Diameter (mm) :
FILTER BY
Bore Type
22 Products found
22234 CDE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 170X310X86MM
NSK
R10 532,78
Excl. VAT
Each
23234 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 170X310X110MM
NSK
R10 069,22
Excl. VAT
Each
23134 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 170X280X88MM
NSK
R9 421,00
Excl. VAT
Each
23134 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 170X280X88MM
NSK
R9 979,54
Excl. VAT
Each
23134 CKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 170X280X88MM
NSK
R8 960,23
Excl. VAT
Each
23134 CKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 170X280X88MM
NSK
R8 960,19
Excl. VAT
Each
22234 CDKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 170X310X86MM
NSK
R10 377,10
Excl. VAT
Each
23034 CDKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 170X260X67MM
NSK
R6 399,24
Excl. VAT
Each
24034 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X260X90MM
NSK
R7 954,10
Excl. VAT
Each
23034 CDE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 170X260X67MM
NSK
R7 226,06
Excl. VAT
Each
23134 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X280X88MM
NSK
R13 135,94
Excl. VAT
Each
24034 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 170X260X90MM
NSK
R7 954,10
Excl. VAT
Each
22334 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 170X360X120MM
NSK
R19 441,25
Excl. VAT
Each
22334 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 170X360X120MM
NSK
R19 441,25
Excl. VAT
Each
24134 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 170X280X109MM
NSK
R11 370,59
Excl. VAT
Each
24134 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 170X280X109MM
NSK
R11 370,59
Excl. VAT
Each
23034 CDKE4C3
SPHERICAL ROLLER BEARING TAPERED STEEL C3 CLEARANCE 170X260X67MM
NSK
R6 647,97
Excl. VAT
Each
23034 CDKE4C4
SPHERICAL ROLLER BEARING TAPERED STEEL C4 CLEARANCE 170X260X67MM
NSK
R7 226,06
Excl. VAT
Each
23234 CE4C3
SPHERICAL ROLLER BEARING PARALLEL STEEL C3 CLEARANCE 170X310X110MM
NSK
R12 748,58
Excl. VAT
Each
23234 CKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 170X310X110MM
NSK
R13 063,00
Excl. VAT
Each
R10 532,78
Excl. VAT
Each
R10 069,22
Excl. VAT
Each
R9 421,00
Excl. VAT
Each
R9 979,54
Excl. VAT
Each
R8 960,23
Excl. VAT
Each
R8 960,19
Excl. VAT
Each
R10 377,10
Excl. VAT
Each
R6 399,24
Excl. VAT
Each
R7 954,10
Excl. VAT
Each
R7 226,06
Excl. VAT
Each
R13 135,94
Excl. VAT
Each
R7 954,10
Excl. VAT
Each
R19 441,25
Excl. VAT
Each
R19 441,25
Excl. VAT
Each
R11 370,59
Excl. VAT
Each
R11 370,59
Excl. VAT
Each
R6 647,97
Excl. VAT
Each
R7 226,06
Excl. VAT
Each
R12 748,58
Excl. VAT
Each
R13 063,00
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location