- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Series
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
Precision
Material
Design
23160 EMBW507C08C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 300X500X160MM TIMKEN
Timken
R73 238,26
Excl. VAT
Each
23230 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 150X270X96MM TIMKEN
Timken
R14 033,77
Excl. VAT
Each
22324 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 120X260X86MM TIMKEN
Timken
R10 551,98
Excl. VAT
Each
23040 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 200X310X82MM TIMKEN
Timken
R15 019,21
Excl. VAT
Each
23048 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 240X360X92MM TIMKEN
Timken
R22 882,45
Excl. VAT
Each
23148 EMBW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 240X400X128MM TIMKEN
Timken
R38 272,29
Excl. VAT
Each
23238 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 190X340X120MM TIMKEN
Timken
R27 556,76
Excl. VAT
Each
23036 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 180X280X74MM TIMKEN
Timken
R11 643,39
Excl. VAT
Each
23144 EMBW33 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS CN CLEARANCE 220X370X120MM TIMKEN
Timken
R25 300,58
Excl. VAT
Each
24144 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 220X370X150MM TIMKEN
Timken
R42 414,53
Excl. VAT
Each
22314 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 70X150X51MM TIMKEN
Timken
R3 441,26
Excl. VAT
Each
23072 EMBW507C08C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 360X540X134MM TIMKEN
Timken
R70 649,58
Excl. VAT
Each
22326 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 130X280X93MM TIMKEN
Timken
R14 482,70
Excl. VAT
Each
22328 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 140X300X102MM TIMKEN
Timken
R14 493,83
Excl. VAT
Each
22330 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 150X320X108MM TIMKEN
Timken
R23 682,13
Excl. VAT
Each
22330 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 150X320X108MM TIMKEN
Timken
R23 682,13
Excl. VAT
Each
22332 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 160X340X114MM TIMKEN
Timken
R25 940,30
Excl. VAT
Each
22332 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 160X340X114MM TIMKEN
Timken
R27 366,00
Excl. VAT
Each
R73 238,26
Excl. VAT
Each
R14 033,77
Excl. VAT
Each
R10 551,98
Excl. VAT
Each
R15 019,21
Excl. VAT
Each
R22 882,45
Excl. VAT
Each
R38 272,29
Excl. VAT
Each
R27 556,76
Excl. VAT
Each
R11 643,39
Excl. VAT
Each
R25 300,58
Excl. VAT
Each
R42 414,53
Excl. VAT
Each
R3 441,26
Excl. VAT
Each
TBQ
TBQ
R70 649,58
Excl. VAT
Each
R14 482,70
Excl. VAT
Each
R14 493,83
Excl. VAT
Each
R23 682,13
Excl. VAT
Each
R23 682,13
Excl. VAT
Each
R25 940,30
Excl. VAT
Each
R27 366,00
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location