- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Series
Inside Diameter (mm)
Outside Diameter (mm)
Width (mm)
-
31.01
-
40.01
-
46.01
-
48.01
-
51.01
-
58.01
-
60.02
-
60.31
-
64.01
-
67.02
-
73.02
-
74.01
-
75.02
-
76.02
-
80.04
-
82.01
-
86.03
-
88.04
-
90.01
-
92.03
-
93.03
-
96.04
-
98.02
-
102.01
-
104.04
-
106.02
-
108.02
-
112.01
-
114.02
-
118.01
-
120.03
-
121.01
-
128.03
-
133.01
-
134.03
-
140.01
-
144.02
-
146.02
-
150.01
-
160.03
-
165.01
-
176.02
-
180.01
-
190.01
-
192.01
-
195.01
-
240.01
-
272.01
Bore Type
Precision
Material
239-630 KYMBW507C08C3 T
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 630X850X165MM TIMKEN
Timken
TBQ
22314 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 70X150X51MM TIMKEN
Timken
R3 441,26
Excl. VAT
Each
23160 EMBW507C08C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 300X500X160MM TIMKEN
Timken
R73 238,26
Excl. VAT
Each
22324 EMW33W800C4 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C4 CLEARANCE 120X260X86MM TIMKEN
Timken
R10 551,98
Excl. VAT
Each
23040 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 200X310X82MM TIMKEN
Timken
R15 019,21
Excl. VAT
Each
23048 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 240X360X92MM TIMKEN
Timken
R22 882,45
Excl. VAT
Each
23148 EMBW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 240X400X128MM TIMKEN
Timken
R38 272,29
Excl. VAT
Each
23238 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 190X340X120MM TIMKEN
Timken
R27 556,76
Excl. VAT
Each
23144 EMBW33 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS CN CLEARANCE 220X370X120MM TIMKEN
Timken
R25 300,58
Excl. VAT
Each
23056 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 280X420X106MM TIMKEN
Timken
R43 538,11
Excl. VAT
Each
23064 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 320X480X121MM TIMKEN
Timken
R53 366,13
Excl. VAT
Each
23132 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X270X86MM TIMKEN
Timken
R11 366,63
Excl. VAT
Each
23172 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 360X600X192MM TIMKEN
Timken
R138 848,34
Excl. VAT
Each
23226 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 130X230X80MM TIMKEN
Timken
R8 674,25
Excl. VAT
Each
24140 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 200X340X140MM TIMKEN
Timken
R33 277,42
Excl. VAT
Each
23230 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 150X270X96MM TIMKEN
Timken
R14 033,77
Excl. VAT
Each
23048 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 240X360X92MM TIMKEN
Timken
R22 882,45
Excl. VAT
Each
23060 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 300X460X118MM TIMKEN
Timken
R43 538,15
Excl. VAT
Each
23156 KEMBW507C08C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 280X460X146MM TIMKEN
Timken
TBQ
TBQ
TBQ
R3 441,26
Excl. VAT
Each
R73 238,26
Excl. VAT
Each
R10 551,98
Excl. VAT
Each
R15 019,21
Excl. VAT
Each
R22 882,45
Excl. VAT
Each
R38 272,29
Excl. VAT
Each
R27 556,76
Excl. VAT
Each
R25 300,58
Excl. VAT
Each
R43 538,11
Excl. VAT
Each
R53 366,13
Excl. VAT
Each
R11 366,63
Excl. VAT
Each
R138 848,34
Excl. VAT
Each
R8 674,25
Excl. VAT
Each
R33 277,42
Excl. VAT
Each
R14 033,77
Excl. VAT
Each
R22 882,45
Excl. VAT
Each
R43 538,15
Excl. VAT
Each
TBQ
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location