BTC, NSK & NTN 6800 Bearings

Shop 6800 Ball Bearings

Shop 6800 ball bearing options at BMG for compact rotating assemblies, small motors, fans, gearboxes, pumps, conveyors and general machinery maintenance. Compare BTC, NSK and NTN 6800 bearings online by seal type, shield type, clearance, brand, stock availability and application fit.

Shop 6800 Bearings View Selection Guide 
Compact 6800 size Compare 6800 deep groove bearing options with 10 mm bore, 19 mm outside diameter and 5 mm width.
Trusted bearing brands Browse available BTC, NSK and NTN 6800 options in one BMG collection.
Suffix-led selection Check open, ZZ shielded, sealed, CN, C3 and other suffix variants where shown in the listing.

Category Focus

6800 ball bearings are compact single-row deep groove bearings used where space is limited and smooth radial load support is required.

Brands BTC, NSK & NTN
Category 6800 Ball Bearing
Core size 10 mm x 19 mm x 5 mm
Buying intent Compact bearing replacement

Start with the suffix

Confirm whether the application needs open, ZZ shielded, 2RS sealed, CN, C3 or another exact 6800 configuration before ordering.

 

Choose 6800 Ball Bearings for Compact Rotating Equipment

6800 ball bearings are selected where compact shafts, housings and rotating parts require a narrow 10 mm x 19 mm x 5 mm bearing size. BMG’s 6800 bearing collection helps buyers compare BTC, NSK and NTN options for small motors, fans, pumps, compact gearboxes, conveyors, equipment repairs and general maintenance replacement work.

Open, Shielded and Sealed Options

Compare 6800 bearing suffixes such as open, ZZ shielded and 2RS sealed where protection level, friction and contamination exposure differ.

Clearance and Fit Checks

Review CN, C3 and other clearance variants where the application has specific speed, temperature, fit or operating-condition requirements.

Brand and Availability Comparison

Compare available BTC, NSK and NTN 6800 bearings by stock status, suffix, construction, closure type and application fit.

6800 Ball Bearings Compact metric bearings commonly specified as 10 mm bore, 19 mm OD and 5 mm width.
Deep Groove Bearings Common ball bearing format used for radial support and low-friction rotation.
ZZ Shielded Bearings Metal-shielded options where added protection is needed with lower contact drag.
2RS Sealed Bearings Rubber-sealed options where dust, dirt or moisture exposure needs closer control.
CN Clearance Bearings Normal-clearance options for applications where standard internal clearance is specified.
C3 Clearance Bearings Selected where the application calls for greater internal clearance than normal.
Small Motor Bearings Compare by speed, noise, lubrication, clearance and operating environment where relevant.
Replacement Bearings Match the old bearing code and suffix before ordering a replacement.

What to Compare Before You Buy

The correct 6800 ball bearing depends on the full suffix, sealing requirement, shield type, clearance, material, lubrication, speed, load and installation environment. Start with the bearing already fitted to the machine, then match the full product code as closely as possible.

  • Confirm the full bearing code, including suffixes such as ZZ, 2RS, CN, C3 or other configuration details.
  • Check the core 6800 dimensions: 10 mm bore, 19 mm outside diameter and 5 mm width.
  • Match open, shielded or sealed construction to the application environment and contamination exposure.
  • Review clearance, cage, lubrication, speed and noise requirements where shown in the product listing.
  • Consider shaft fit, housing fit, operating temperature, load, moisture exposure and maintenance access.
  • Use the BMG listing to compare BTC, NSK and NTN 6800 bearing options online.

Common Uses for 6800 Ball Bearings

6800 ball bearings are commonly used in compact rotating assemblies, small motors, fans, compact gearboxes, pumps, conveyors, shafts, pulleys, workshop repairs, light machinery and general industrial maintenance where the 10 mm x 19 mm x 5 mm bearing envelope is specified.

For replacement work, check the old bearing markings before ordering. A 6800 bearing may share the same base size while differing by seal type, shield type, clearance, cage or lubrication configuration, so the suffix is often critical.

6800 Ball Bearing FAQs

What size is a 6800 ball bearing?

A standard 6800 ball bearing has a 10 mm bore, 19 mm outside diameter and 5 mm width. Always confirm the suffix and construction before ordering.

Can I buy 6800 ball bearings online from BMG?

Yes. Use the BMG 6800 product listing to browse available BTC, NSK and NTN 6800 bearing options online.

What does 6800 ZZ mean?

6800 ZZ usually refers to a 6800 bearing with metal shields on both sides. Match the existing suffix because shielded and sealed bearings are not the same.

What does 6800 2RS mean?

6800 2RS usually indicates rubber seals on both sides. Check the supplier listing because suffix wording can differ between brands.

What is a 6800 C3 bearing?

A 6800 C3 bearing has greater internal clearance than normal clearance. It should be selected only where the application or existing bearing code calls for C3 clearance.

Which brands supply 6800 bearings at BMG?

The supplied BMG listing is positioned for BTC, NSK and NTN 6800 ball bearing options, subject to current stock and product availability.

Shop 6800 Ball Bearings at BMG

Browse BMG’s 6800 ball bearing range online for BTC, NSK and NTN options used across compact equipment, small motors, fans, pumps, conveyors, gearboxes and general machinery replacement applications.

Shop 6800 Bearings