BTC, IKO, NSK, NTN, Rollway & Timken 6201 Bearings

Shop 6201 Ball Bearings

Shop 6201 ball bearing options at BMG for small motors, fans, pumps, gearboxes, conveyors, rollers, shafts and general machinery maintenance. Compare BTC, IKO, NSK, NTN, Rollway and Timken 6201 bearings online by seal type, shield type, clearance, brand, stock availability and application fit.

Shop 6201 Bearings View Selection Guide 
Common 6201 size Compare 6201 deep groove bearing options with 12 mm bore, 32 mm outside diameter and 10 mm width.
Multiple bearing brands Browse available BTC, IKO, NSK, NTN, Rollway and Timken 6201 options in one BMG collection.
Suffix-led selection Check open, ZZ shielded, 2RS sealed, CN, C3, N and other suffix variants where shown in the listing.

Category Focus

6201 ball bearings are single-row deep groove bearings used where compact rotating equipment requires radial support, smooth rotation and accurate replacement fit.

Brands BTC, IKO, NSK, NTN, Rollway & Timken
Category 6201 Ball Bearing
Core size 12 mm x 32 mm x 10 mm
Buying intent Bearing replacement supply

Start with the suffix

Confirm whether the application needs open, ZZ shielded, 2RS sealed, N snap-ring groove, CN, C3 or another exact 6201 configuration before ordering.

 

Choose 6201 Ball Bearings for Small Motors, Fans and Rotating Equipment

6201 ball bearings are selected where shafts, housings and rotating components require a 12 mm x 32 mm x 10 mm bearing size. BMG’s 6201 bearing collection helps buyers compare BTC, IKO, NSK, NTN, Rollway and Timken options for small motors, fans, pumps, gearboxes, rollers, conveyors, equipment repairs and general maintenance replacement work.

Open, Shielded and Sealed Options

Compare 6201 bearing suffixes such as open, ZZ shielded and 2RS sealed where protection level, friction and contamination exposure differ.

Clearance and Snap-Ring Variants

Review CN, C3, N snap-ring groove and other suffix variants where the machine fit, speed, temperature or operating condition requires them.

Brand and Availability Comparison

Compare available BTC, IKO, NSK, NTN, Rollway and Timken 6201 bearings by stock status, suffix, construction, closure type and application fit.

6201 Ball Bearings Metric bearings commonly specified as 12 mm bore, 32 mm OD and 10 mm width.
Deep Groove Bearings Common ball bearing format used for radial support and low-friction rotation.
Open Bearings Selected where the application allows open bearing construction and separate lubrication control.
ZZ Shielded Bearings Metal-shielded options where added protection is needed with lower contact drag.
2RS Sealed Bearings Rubber-sealed options where dust, dirt or moisture exposure needs closer control.
C3 Clearance Bearings Selected where the application calls for greater internal clearance than normal.
Small Motor Bearings Compare by speed, noise, lubrication, clearance and operating environment where relevant.
Replacement Bearings Match the old bearing code and suffix before ordering a replacement.

What to Compare Before You Buy

The correct 6201 ball bearing depends on the full suffix, sealing requirement, shield type, clearance, snap-ring need, material, lubrication, speed, load and installation environment. Start with the bearing already fitted to the machine, then match the full product code as closely as possible.

  • Confirm the full bearing code, including suffixes such as ZZ, 2RS, CN, C3, N or other configuration details.
  • Check the core 6201 dimensions: 12 mm bore, 32 mm outside diameter and 10 mm width.
  • Match open, shielded or sealed construction to the application environment and contamination exposure.
  • Review clearance, cage, lubrication, speed and noise requirements where shown in the product listing.
  • Consider shaft fit, housing fit, operating temperature, load, moisture exposure and maintenance access.
  • Use the BMG listing to compare BTC, IKO, NSK, NTN, Rollway and Timken 6201 bearing options online.

Common Uses for 6201 Ball Bearings

6201 ball bearings are commonly used in small motors, fans, pumps, compact gearboxes, conveyors, rollers, shafts, pulleys, workshop repairs, light machinery and general industrial maintenance where the 12 mm x 32 mm x 10 mm bearing envelope is specified.

For replacement work, check the old bearing markings before ordering. A 6201 bearing may share the same base size while differing by seal type, shield type, clearance, snap-ring groove, cage or lubrication configuration, so the suffix is often critical.

6201 Ball Bearing FAQs

What size is a 6201 ball bearing?

A standard 6201 ball bearing has a 12 mm bore, 32 mm outside diameter and 10 mm width. Always confirm the suffix and construction before ordering.

Can I buy 6201 ball bearings online from BMG?

Yes. Use the BMG 6201 product listing to browse available BTC, IKO, NSK, NTN, Rollway and Timken 6201 bearing options online.

What does 6201 ZZ mean?

6201 ZZ usually refers to a 6201 bearing with metal shields on both sides. Match the existing suffix because shielded and sealed bearings are not the same.

What does 6201 2RS mean?

6201 2RS usually indicates rubber seals on both sides. Check the supplier listing because suffix wording can differ between brands.

What is a 6201 C3 bearing?

A 6201 C3 bearing has greater internal clearance than normal clearance. It should be selected only where the application or existing bearing code calls for C3 clearance.

Which brands supply 6201 bearings at BMG?

The supplied BMG listing is positioned for BTC, IKO, NSK, NTN, Rollway and Timken 6201 ball bearing options, subject to current stock and product availability.

Shop 6201 Ball Bearings at BMG

Browse BMG’s 6201 ball bearing range online for BTC, IKO, NSK, NTN, Rollway and Timken options used across small motors, fans, pumps, rollers, conveyors, gearboxes and general machinery replacement applications.

Shop 6201 Bearings