BTC, NSK, NTN, Rollway & Timken 6200 Bearings

Shop 6200 Ball Bearings

Shop 6200 ball bearing options at BMG for small motors, fans, pumps, gearboxes, conveyors, rollers, shafts and general machinery maintenance. Compare BTC, NSK, NTN, Rollway and Timken 6200 bearings online by seal type, shield type, clearance, brand, stock availability and application fit.

Shop 6200 Bearings View Selection Guide 
Common 6200 size Compare 6200 deep groove bearing options with 10 mm bore, 30 mm outside diameter and 9 mm width.
Multiple bearing brands Browse available BTC, NSK, NTN, Rollway and Timken 6200 options in one BMG collection.
Suffix-led selection Check open, ZZ shielded, 2RS sealed, CN, C3, N and other suffix variants where shown in the listing.

Category Focus

6200 ball bearings are single-row deep groove bearings used where compact rotating equipment requires radial support, smooth rotation and accurate replacement fit.

Brands BTC, NSK, NTN, Rollway & Timken
Category 6200 Ball Bearing
Core size 10 mm x 30 mm x 9 mm
Buying intent Bearing replacement supply

Start with the suffix

Confirm whether the application needs open, ZZ shielded, 2RS sealed, N snap-ring groove, CN, C3 or another exact 6200 configuration before ordering.

 

Choose 6200 Ball Bearings for Small Motors, Fans and Rotating Equipment

6200 ball bearings are selected where shafts, housings and rotating components require a 10 mm x 30 mm x 9 mm bearing size. BMG’s 6200 bearing collection helps buyers compare BTC, NSK, NTN, Rollway and Timken options for small motors, fans, pumps, gearboxes, rollers, conveyors, equipment repairs and general maintenance replacement work.

Open, Shielded and Sealed Options

Compare 6200 bearing suffixes such as open, ZZ shielded and 2RS sealed where protection level, friction and contamination exposure differ.

Clearance and Snap-Ring Variants

Review CN, C3, N snap-ring groove and other suffix variants where the machine fit, speed, temperature or operating condition requires them.

Brand and Availability Comparison

Compare available BTC, NSK, NTN, Rollway and Timken 6200 bearings by stock status, suffix, construction, closure type and application fit.

6200 Ball Bearings Metric bearings commonly specified as 10 mm bore, 30 mm OD and 9 mm width.
Deep Groove Bearings Common ball bearing format used for radial support and low-friction rotation.
Open Bearings Selected where the application allows open bearing construction and separate lubrication control.
ZZ Shielded Bearings Metal-shielded options where added protection is needed with lower contact drag.
2RS Sealed Bearings Rubber-sealed options where dust, dirt or moisture exposure needs closer control.
C3 Clearance Bearings Selected where the application calls for greater internal clearance than normal.
Small Motor Bearings Compare by speed, noise, lubrication, clearance and operating environment where relevant.
Replacement Bearings Match the old bearing code and suffix before ordering a replacement.

What to Compare Before You Buy

The correct 6200 ball bearing depends on the full suffix, sealing requirement, shield type, clearance, snap-ring need, material, lubrication, speed, load and installation environment. Start with the bearing already fitted to the machine, then match the full product code as closely as possible.

  • Confirm the full bearing code, including suffixes such as ZZ, 2RS, CN, C3, N or other configuration details.
  • Check the core 6200 dimensions: 10 mm bore, 30 mm outside diameter and 9 mm width.
  • Match open, shielded or sealed construction to the application environment and contamination exposure.
  • Review clearance, cage, lubrication, speed and noise requirements where shown in the product listing.
  • Consider shaft fit, housing fit, operating temperature, load, moisture exposure and maintenance access.
  • Use the BMG listing to compare BTC, NSK, NTN, Rollway and Timken 6200 bearing options online.

Common Uses for 6200 Ball Bearings

6200 ball bearings are commonly used in small motors, fans, pumps, compact gearboxes, conveyors, rollers, shafts, pulleys, workshop repairs, light machinery and general industrial maintenance where the 10 mm x 30 mm x 9 mm bearing envelope is specified.

For replacement work, check the old bearing markings before ordering. A 6200 bearing may share the same base size while differing by seal type, shield type, clearance, snap-ring groove, cage or lubrication configuration, so the suffix is often critical.

6200 Ball Bearing FAQs

What size is a 6200 ball bearing?

A standard 6200 ball bearing has a 10 mm bore, 30 mm outside diameter and 9 mm width. Always confirm the suffix and construction before ordering.

Can I buy 6200 ball bearings online from BMG?

Yes. Use the BMG 6200 product listing to browse available BTC, NSK, NTN, Rollway and Timken 6200 bearing options online.

What does 6200 ZZ mean?

6200 ZZ usually refers to a 6200 bearing with metal shields on both sides. Match the existing suffix because shielded and sealed bearings are not the same.

What does 6200 2RS mean?

6200 2RS usually indicates rubber seals on both sides. Check the supplier listing because suffix wording can differ between brands.

What is a 6200 C3 bearing?

A 6200 C3 bearing has greater internal clearance than normal clearance. It should be selected only where the application or existing bearing code calls for C3 clearance.

Which brands supply 6200 bearings at BMG?

The supplied BMG listing is positioned for BTC, NSK, NTN, Rollway and Timken 6200 ball bearing options, subject to current stock and product availability.

Shop 6200 Ball Bearings at BMG

Browse BMG’s 6200 ball bearing range online for BTC, NSK, NTN, Rollway and Timken options used across small motors, fans, pumps, rollers, conveyors, gearboxes and general machinery replacement applications.

Shop 6200 Bearings