BTC, NSK, NTN & Timken 6212 Bearings

Shop 6212 Ball Bearings

Shop 6212 ball bearing options at BMG for electric motors, pumps, gearboxes, fans, conveyors, shafts and general industrial machinery maintenance. Compare BTC, NSK, NTN and Timken 6212 bearings online by seal type, clearance, snap-ring groove, brand, stock availability and application fit.

Shop 6212 Bearings View Selection Guide 
Common 6212 size Compare 6212 deep groove bearing options with 60 mm bore, 110 mm outside diameter and 22 mm width.
Multiple bearing brands Browse available BTC, NSK, NTN and Timken 6212 options in one BMG collection.
Suffix-led selection Check open, shielded, sealed, C3, NR and other suffix variants where shown in the listing.

Category Focus

6212 ball bearings are commonly selected as single-row deep groove bearings for radial load support, smooth rotation and medium-size machinery replacement requirements.

Brands BTC, NSK, NTN & Timken
Category 6212 Ball Bearing
Core size 60 mm x 110 mm x 22 mm
Buying intent Bearing replacement supply

Start with the suffix

Confirm whether the application needs open, ZZ shielded, 2RS sealed, NR snap-ring groove, C3 clearance or another exact 6212 configuration before ordering.

 

Choose 6212 Ball Bearings for Motors, Pumps and Rotating Machinery

6212 ball bearings are selected where shafts, housings and rotating components require a 60 mm x 110 mm x 22 mm bearing size. BMG’s 6212 bearing collection helps buyers compare BTC, NSK, NTN and Timken options for electric motors, pumps, fans, gearboxes, conveyors, plant equipment and general maintenance replacement work.

Open, Shielded and Sealed Options

Compare 6212 bearing suffixes such as open, ZZ shielded and 2RS sealed where protection level, friction and contamination exposure differ.

C3 and Snap-Ring Variants

Review C3 clearance, NR snap-ring groove and other suffix variants where the machine fit, temperature or operating condition requires them.

Brand and Availability Comparison

Compare available BTC, NSK, NTN and Timken 6212 bearings by stock status, suffix, construction, clearance and application fit.

6212 Ball Bearings Metric bearings commonly specified as 60 mm bore, 110 mm OD and 22 mm width.
Deep Groove Bearings Common bearing type used for smooth rotation and radial load support in machinery.
ZZ Shielded Bearings Metal-shielded options where added protection is needed with lower contact drag.
2RS Sealed Bearings Rubber-sealed options where dirt, dust or moisture exposure needs closer control.
C3 Clearance Bearings Selected where the application calls for greater internal clearance than normal.
NR Snap-Ring Bearings Used where a retaining ring or snap-ring groove configuration is part of the housing design.
Electric Motor Bearings Compare by noise, speed, lubrication, clearance and operating environment where relevant.
Replacement Bearings Match the old bearing code and suffix before ordering a replacement.

What to Compare Before You Buy

The correct 6212 ball bearing depends on the full suffix, sealing requirement, clearance, snap-ring need, material, lubrication, speed, load and installation environment. Start with the bearing already fitted to the machine, then match the full product code as closely as possible.

  • Confirm the full bearing code, including suffixes such as ZZ, 2RS, C3, NR or other configuration details.
  • Check the core 6212 dimensions: 60 mm bore, 110 mm outside diameter and 22 mm width.
  • Match open, shielded or sealed construction to the application environment and contamination exposure.
  • Review clearance, cage, lubrication, snap-ring groove and speed requirements where shown in the product listing.
  • Consider shaft fit, housing fit, operating temperature, load direction, moisture exposure and maintenance access.
  • Use the BMG listing to compare BTC, NSK, NTN and Timken 6212 bearing options online.

Common Uses for 6212 Ball Bearings

6212 ball bearings are commonly used in electric motors, pumps, fans, gearboxes, conveyors, shafts, pulleys, plant equipment, workshop repairs and general industrial machinery where the 60 mm x 110 mm x 22 mm bearing envelope is specified.

For replacement work, check the old bearing markings before ordering. A 6212 bearing may share the same base size while differing by seal type, clearance, snap-ring groove, cage or lubrication configuration, so the suffix is often critical.

6212 Ball Bearing FAQs

What size is a 6212 ball bearing?

A standard 6212 ball bearing has a 60 mm bore, 110 mm outside diameter and 22 mm width. Always confirm the suffix and construction before ordering.

Can I buy 6212 ball bearings online from BMG?

Yes. Use the BMG 6212 product listing to browse available BTC, NSK, NTN and Timken 6212 bearing options online.

What does 6212 2RS mean?

6212 identifies the bearing size and series, while 2RS usually indicates rubber seals on both sides. Check the product listing for the exact supplier suffix definition.

What does 6212 ZZ mean?

6212 ZZ usually refers to a 6212 bearing with metal shields on both sides. Shielded bearings and sealed bearings are not the same, so match the existing suffix where possible.

What is a 6212 C3 bearing?

A 6212 C3 bearing has greater internal clearance than normal clearance. It should be selected only where the application or existing bearing code calls for C3 clearance.

Which brands supply 6212 bearings at BMG?

The supplied BMG listing is positioned for BTC, NSK, NTN and Timken 6212 ball bearing options, subject to current stock and product availability.

Shop 6212 Ball Bearings at BMG

Browse BMG’s 6212 ball bearing range online for BTC, NSK, NTN and Timken options used across electric motors, pumps, fans, conveyors, gearboxes and general machinery replacement applications.

Shop 6212 Bearings