BTC, NSK, Rollway, SNR, NTN & Timken 6000 Bearings

Shop 6000 Ball Bearings

Shop 6000 ball bearing options at BMG for compact rotating assemblies, small motors, fans, gearboxes, pumps, conveyors and general machinery maintenance. Compare BTC, NSK, Rollway, SNR, NTN and Timken 6000 bearings online by seal type, clearance, material, brand, stock availability and application fit.

Shop 6000 Bearings View Selection Guide 
Common 6000 size Compare 6000 deep groove bearing options with 10 mm bore, 26 mm outside diameter and 8 mm width.
Multiple bearing brands Browse available BTC, NSK, Rollway, SNR, NTN and Timken 6000 options in one BMG collection.
Suffix-led selection Check open, shielded, sealed, C3, snap-ring groove and other suffix variants where shown in the listing.

Category Focus

6000 ball bearings are commonly selected as single-row deep groove bearings for compact radial load support, smooth rotation and small machinery replacement requirements.

Brands BTC, NSK, Rollway, SNR, NTN & Timken
Category 6000 Ball Bearing
Core size 10 mm x 26 mm x 8 mm
Buying intent Bearing replacement supply

Start with the suffix

Confirm whether the application needs open, ZZ shielded, 2RS sealed, N snap-ring groove, C3 clearance or another exact 6000 configuration before ordering.

 

Choose 6000 Ball Bearings for Compact Rotating Equipment

6000 ball bearings are selected where compact shafts, housings and rotating components require a 10 mm x 26 mm x 8 mm bearing size. BMG’s 6000 bearing collection helps buyers compare BTC, NSK, Rollway, SNR, NTN and Timken options for small motors, fans, pumps, gearboxes, conveyors, equipment repairs and general maintenance replacement work.

Open, Shielded and Sealed Options

Compare 6000 bearing suffixes such as open, Z, ZZ and 2RS where protection level, friction and contamination exposure differ.

Clearance and Snap-Ring Variants

Review CN, C3, N snap-ring groove and other suffix variants where the machine fit, temperature or operating condition requires them.

Brand and Availability Comparison

Compare available BTC, NSK, Rollway, SNR, NTN and Timken 6000 bearings by stock status, suffix, construction, clearance and application fit.

6000 Ball Bearings Compact metric bearings commonly specified as 10 mm bore, 26 mm OD and 8 mm width.
Deep Groove Bearings Common bearing type used for smooth rotation and radial load support in machinery.
ZZ Shielded Bearings Metal-shielded options where added protection is needed with lower contact drag.
2RS Sealed Bearings Rubber-sealed options where dirt, dust or moisture exposure needs closer control.
C3 Clearance Bearings Selected where the application calls for greater internal clearance than normal.
N / NR Variants Used where a snap-ring groove or retaining-ring arrangement forms part of the housing design.
Electric Motor Bearings Compare by noise, speed, lubrication, clearance and operating environment where relevant.
Replacement Bearings Match the old bearing code and suffix before ordering a replacement.

What to Compare Before You Buy

The correct 6000 ball bearing depends on the full suffix, sealing requirement, clearance, snap-ring need, material, lubrication, speed, load and installation environment. Start with the bearing already fitted to the machine, then match the full product code as closely as possible.

  • Confirm the full bearing code, including suffixes such as Z, ZZ, 2RS, C3, N or other configuration details.
  • Check the core 6000 dimensions: 10 mm bore, 26 mm outside diameter and 8 mm width.
  • Match open, shielded or sealed construction to the application environment and contamination exposure.
  • Review clearance, cage, lubrication, snap-ring groove and speed requirements where shown in the product listing.
  • Consider shaft fit, housing fit, operating temperature, load direction, moisture exposure and maintenance access.
  • Use the BMG listing to compare BTC, NSK, Rollway, SNR, NTN and Timken 6000 bearing options online.

Common Uses for 6000 Ball Bearings

6000 ball bearings are commonly used in small motors, fans, compact gearboxes, pumps, conveyors, shafts, pulleys, workshop repairs, light machinery and general industrial maintenance where the 10 mm x 26 mm x 8 mm bearing envelope is specified.

For replacement work, check the old bearing markings before ordering. A 6000 bearing may share the same base size while differing by seal type, clearance, snap-ring groove, cage or lubrication configuration, so the suffix is often critical.

6000 Ball Bearing FAQs

What size is a 6000 ball bearing?

A standard 6000 ball bearing has a 10 mm bore, 26 mm outside diameter and 8 mm width. Always confirm the suffix and construction before ordering.

Can I buy 6000 ball bearings online from BMG?

Yes. Use the BMG 6000 product listing to browse available BTC, NSK, Rollway, SNR, NTN and Timken 6000 bearing options online.

What does 6000 2RS mean?

6000 identifies the bearing size and series, while 2RS usually indicates rubber seals on both sides. Check the product listing for the exact supplier suffix definition.

What does 6000 ZZ mean?

6000 ZZ usually refers to a 6000 bearing with metal shields on both sides. Shielded bearings and sealed bearings are not the same, so match the existing suffix where possible.

What is a 6000 C3 bearing?

A 6000 C3 bearing has greater internal clearance than normal clearance. It should be selected only where the application or existing bearing code calls for C3 clearance.

Which brands supply 6000 bearings at BMG?

The supplied BMG listing is positioned for BTC, NSK, Rollway, SNR, NTN and Timken 6000 ball bearing options, subject to current stock and product availability.

Shop 6000 Ball Bearings at BMG

Browse BMG’s 6000 ball bearing range online for BTC, NSK, Rollway, SNR, NTN and Timken options used across small motors, fans, compact equipment, pumps, conveyors, gearboxes and general machinery replacement applications.

Shop 6000 Bearings