| Details |
|---|
|
The G20 gear coupling is a double engagement, close coupled solution with two flex halves to accommodate both offset and/or angular misalignment as well as end float. Engineered for all horizontal, close coupled applications including fans, overhead cranes, conveyors, steel and paper mill equipment, it is adaptable with limited end float for use on electric motors, generators and other machinery fitted with sleeve or straight roller bearings. The couplings are engineered to accommodate torque loads up to 1,197,000 (lb-in) and shaft diameters up to 56.50 inches.
|
| Product properties | |
|---|---|
| Brand | Falk |
| Category | Gear |
| Outside Diameter (mm) | 457.2 |
| Bore Type | Pilot Bore |
| Material | Steel |
| Series | G20 |
| Max Speed RPM | 2450.0 |
| Max Bore (mm) | 231.775 |
| Hub Diameter (mm) | 304.8 |
| Component | Coupling |
| Coupling Type | Non-elastic |
| Min Bore (mm) | 114.3 |
| Length Through Bore (mm) | 63.5 |
| Hub Length (mm) | 188.214 |
| Nominal Torque Rating (Nm) | 90399 |
| Size | 1060 |
| Download |
|---|