- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Category :
FILTER BY
Length (mm)
M20X110MSCSBN
Cup square & nut, non hex, plain, bag, GR 4.8, STD, 20 x 2.5 x 110 mm, 62 p/bag, Fastbolt.
Fastbolt
M12X50MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 12 x 1.75 x 50 mm, Fastbolt.
Fastbolt
M8X40MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 8 x 1.25 x 40 mm, Fastbolt.
Fastbolt
M10X20MSCSBYZP
Cup square, non hex, yellow zinc plated, GR 4.8, STD, 10 x 1.5 x 20 mm, Fastbolt.
Fastbolt
M10X40S-SCSBA2
Cup square, non hex, stainless steel, A2-304, STD, 10 x 1.5 x 40 mm, Fastbolt.
Fastbolt
M8X75MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 8 x 1.25 x 75 mm, Fastbolt.
Fastbolt
M6X25MSCSBYZP
Cup square, non hex, yellow zinc plated, GR 4.8, STD, 6 x 1 x 25 mm, Fastbolt.
Fastbolt
M10X40MSCSBNZP
Cup square & nut, non hex, zinc plated, bag, GR 4.8, STD, 10 x 1.5 x 40 mm, 585 p/bag, Fastbolt.
Fastbolt
M20X110MSCSBN
Cup square & nut, non hex, plain, bag, GR 4.8, STD, 20 x 2.5 x 110 mm, 62 p/bag, Fastbolt.
Fastbolt
M12X50MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 12 x 1.75 x 50 mm, Fastbolt.
Fastbolt
M8X40MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 8 x 1.25 x 40 mm, Fastbolt.
Fastbolt
M6X25MSCSBNZP
Cup square & nut, non hex, zinc plated, bag, GR 4.8, STD, 6 x 1 x 25 mm, 2273 p/bag, Fastbolt.
Fastbolt
M10X20MSCSBYZP
Cup square, non hex, yellow zinc plated, GR 4.8, STD, 10 x 1.5 x 20 mm, Fastbolt.
Fastbolt
M10X40S-SCSBA2
Cup square, non hex, stainless steel, A2-304, STD, 10 x 1.5 x 40 mm, Fastbolt.
Fastbolt
M8X75MSCSBHDG
Cup square, non hex, hot dip galvanised, GR 4.8, STD, 8 x 1.25 x 75 mm, Fastbolt.
Fastbolt
M6X25MSCSBYZP
Cup square, non hex, yellow zinc plated, GR 4.8, STD, 6 x 1 x 25 mm, Fastbolt.
Fastbolt
M6X30MSCSBNZP
Cup square & nut, non hex, zinc plated, bag, GR 4.8, STD, 6 x 1 x 30 mm, 2119 p/bag, Fastbolt.
Fastbolt
M10X35MSCSBN
Cup square & nut, non hex, plain, bag, GR 4.8, STD, 10 x 1.5 x 35 mm, 634 p/bag, Fastbolt.
Fastbolt
M10X40MSCSBNZP
Cup square & nut, non hex, zinc plated, bag, GR 4.8, STD, 10 x 1.5 x 40 mm, 585 p/bag, Fastbolt.
Fastbolt
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location