Skip to content Skip to navigation menu
ArticleIRB 1220

Inner Ring, Shell Type Needle Roller Bearings, 19.050 x 25.400 x 32.000 mm, IKO.

Brand: IKO
Please sign-in or register to add this product to your shopping cart.

Details

Inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heattreated and finished by grinding, and used as the raceway surfaces. However, when it is impossible to make shaft surfaces according to the specified surface hardness or surface roughness, inner rings are used. When shafts move axially or seals are used adjacent to bearings, wide inner rings can be selected. Inner rings can also be used economically as bushings without requiring any additional machining.

Product properties
Brand IKO
Category Inner Rings
Inside Diameter (mm) 19.05
Outside Diameter (mm) 25.4
Width (mm) 32.0
Appropriate Bearing BA 1620
Series Inch
Design Type(s) For Shell Type Needle Roller Bearings
Bearing Type Inner Ring
Download