Skip to content Skip to navigation menu
ArticleUCPA 207-23 TR

Bearing unit, cast iron, pillow block, tapped-base, setscrew type, 2 mount holes, 36,5125 mm, TR.

Brand: TR
Please sign-in or register to add this product to your shopping cart.

Details

Pillow block bearing units are the most popular housing design for mounted bearings. Featuring a one-piece cast iron housing they are designed to support loads primarily directed through the base. The two bolt holes are slotted for adjustment during mounting. Units are prelubricated and designed to slip fit on to the shaft. Setscrew type fixed to the shaft by means of the setscrews prepared in the wide inner ring. Dual heavy-duty contact-type seals, steel plate slingers on sides for dust exclusion. The pillow block is supplied with a grease fitting for relubrication. Tapped base housing design is optimized for radial loads acting in the direction of the base or the support surface. These units have a narrow width for tight areas and can be fitted with bolts from the underneath of the base.

Product properties
Brand TR
Category Pillow Block
Inside Diameter (mm) 36.5125
Overall Height (mm) 95.0
Overall Length (mm) 110.0
Overall Width (mm) 48.0
Shaft Center Height (mm) 47.6
Mount Hole Center To Center (mm) 80.0
Bore Type Parallel
Duty Standard Duty
Bolt Size M14X2
Number Of Mount Holes 2
Design Type(s) Set Screw
Download