- Home
- All Categories
- Bearings
- Roller
- Spherical
FILTER BY
Categories
Bearing Type
Seal Type
Bore Type
Precision
23238 B NTN
Spherical roller bearing, parallel bore, C0 clearance, 190 x 340 x 120 mm, NTN.
NTN
R24 016,29
Excl. VAT
Each
24140 CE4C4
SPHERICAL ROLLER BEARING PARALLEL STEEL C4 CLEARANCE 200X340X140MM
NSK
R16 708,28
Excl. VAT
Each
23238 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 190X340X120MM TIMKEN
Timken
R27 556,76
Excl. VAT
Each
24044 BC4 NTN
Spherical roller bearing, parallel bore, C4 clearance, 220 x 340 x 118 mm, NTN.
NTN
R15 714,64
Excl. VAT
Each
24140 B NTN
Spherical roller bearing, parallel bore, C0 clearance, 200 x 340 x 140 mm, NTN.
NTN
R24 750,95
Excl. VAT
Each
23044 BL1C3 NTN
Spherical roller bearing, parallel bore, brass cage, C3 clearance, 220 x 340 x 90 mm, NTN.
NTN
R21 436,52
Excl. VAT
Each
23238 BC3 NTN
Spherical roller bearing, parallel bore, C3 clearance, 190 x 340 x 120 mm, NTN.
NTN
R24 027,53
Excl. VAT
Each
23238 BKC3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 190 x 340 x 120 mm, NTN.
NTN
R21 240,96
Excl. VAT
Each
23044 CAMKE4C4
SPHERICAL ROLLER BEARING TAPERED BRASS C4 CLEARANCE 220X340X90MM
NSK
R15 317,42
Excl. VAT
Each
23140 BKC3 NTN
Spherical roller bearing, tapered bore, C3 clearance, 200 x 340 x 112 mm, NTN.
NTN
R20 189,34
Excl. VAT
Each
23140 CKE4
SPHERICAL ROLLER BEARING TAPERED STEEL CN CLEARANCE 200X340X112MM
NSK
R15 520,67
Excl. VAT
Each
24140 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 200X340X140MM TIMKEN
Timken
R33 277,42
Excl. VAT
Each
22238 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 190X340X92MM
NSK
R10 477,46
Excl. VAT
Each
22238 KEMW33C3 TIM
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 190X340X92MM TIMKEN
Timken
R19 538,88
Excl. VAT
Each
22332 MBKW33C3 R
SPHERICAL ROLLER BRG TAPERED BRASS C3 CLEARANCE 160X340X114MM ROLLWAY
Rollway
R15 486,04
Excl. VAT
Each
23044 EMW33C3 TIM
SPHERICAL ROLLER BRG PARALLEL BRASS C3 CLEARANCE 220X340X90MM TIMKEN
Timken
R18 933,90
Excl. VAT
Each
23044 CAME4C3
SPHERICAL ROLLER BEARING PARALLEL BRASS C3 CLEARANCE 220X340X90MM
NSK
R15 317,42
Excl. VAT
Each
23044 CAMKE4C3
SPHERICAL ROLLER BEARING TAPERED BRASS C3 CLEARANCE 220X340X90MM
NSK
R13 752,86
Excl. VAT
Each
23140 CE4
SPHERICAL ROLLER BEARING PARALLEL STEEL CN CLEARANCE 200X340X112MM
NSK
R15 520,65
Excl. VAT
Each
R24 016,29
Excl. VAT
Each
R16 708,28
Excl. VAT
Each
R27 556,76
Excl. VAT
Each
R15 714,64
Excl. VAT
Each
R24 750,95
Excl. VAT
Each
23044 BL1C3 NTN
Spherical roller bearing, parallel bore, brass cage, C3 clearance, 220 x 340 x 90 mm, NTN.
NTN
R21 436,52
Excl. VAT
Each
R24 027,53
Excl. VAT
Each
R21 240,96
Excl. VAT
Each
R15 317,42
Excl. VAT
Each
R20 189,34
Excl. VAT
Each
R15 520,67
Excl. VAT
Each
R33 277,42
Excl. VAT
Each
R51 132,04
Excl. VAT
Each
R10 477,46
Excl. VAT
Each
R19 538,88
Excl. VAT
Each
R15 486,04
Excl. VAT
Each
R18 933,90
Excl. VAT
Each
R15 317,42
Excl. VAT
Each
R13 752,86
Excl. VAT
Each
R15 520,65
Excl. VAT
Each
Added to Your Shopping Cart
Mounting of Spherical Roller Bearings
Clean all shaft surfaces and dress any burrs with a file and a fine grade sandpaper. Remove any dirt or contaminants using a clean cloth. Apply a light coat of oil to the prepared surfaces Check that the shaft size conforms to ISO h9 / ITS tolerances. Unwrap the Spherical roller bearing only enough to measure the radial internal clearance. With the Spherical roller bearing on a work bench, rotate the Spherical roller bearing inner ring to seat the rollers. Check the radial internal clearance using a feeler gauge. This is done at the top of the Spherical roller bearing between the outer ring raceway and the top of the rollers. Remove the locknut and lock washer from the sleeve. Smear the shaft and outside diameter of the sleeve with light viscosity oil. Open the adapter sleeve slightly by inserting and twisting a flat screwdriver into the slit and position the sleeve on the shaft. Ensure that the screwdriver has not damaged the adapter sleeve. Dress accordingly. Apply anti-scuff paste or similar lubricant between the locknut face and lock washer. Pack the Spherical roller bearing with grease (if to be grease lubricated). Slide the Spherical roller bearing and lock washer onto the sleeve and hand tighten the locknut until all play is removed. This is the starting point from where the clearance will be removed. It is preferred where possible, that the lock nut drive directly against the Spherical roller bearing until the final clearance is achieved. The nut is then removed, and the tab washer is then fitted between the bearing face and lock nut. Further tighten the locknut using a C spanner whilst continuously checking the remaining radial internal clearance. When the Spherical roller bearing is mounted on the shaft, the clearance should be checked at the bottom of the Spherical roller bearing, between the outer ring raceway underneath the rollers. The nut should be tightened until the clearance has been reduced by the amount shown in Table Once this clearance is obtained, check to see if a tab on the lock washer aligns with one of the available slots on the locknut. If so, bend that tab into the slot. If no tabs line up with a slot, tighten the locknut until the nearest tab lines up. NEVER back off the nut to align a tab with the slot. Check that the Spherical roller bearing rotates freely without any binding.
Product Availability by Store Location